MANUFACTURED IN THE MIDWEST
Outlaw Kart Fuel Tank Guide: Sizes, Mounts & Petcocks

Buyer's Guide, Fuel System, Fuel Tanks, How-To, Maintenance, Outlaw Karts, Toigo Racing -

Outlaw Kart Fuel Tank Guide: Sizes, Mounts & Petcocks

Nobody puts the fuel tank at the top of the shopping list. Then a vented cap clogs, a clamp walks loose on the steering post, or a cheap line splits, and your night is over before the feature. The tank is a simple part, but it sits right in front of you and it feeds the motor, so it deserves a few minutes of attention. This guide walks through the tank options we sell, how they mount, and what to check so fuel stays a non-issue.

Labeled diagram of an upright plastic fuel tank mounted on a 1-inch kart steering post: cap, tank body, suction unit, mounting collar, stud and fuel line to the carburetor

The Basic Layout: Tank, Collar, Line and Carb

Most outlaw karts run an upright tank clamped to the steering post. A collar wraps the 1 inch post, a stud ties the tank to that collar, and a fuel line runs back to the carburetor. The diagram above shows the pieces. Everything between the tank and the carb is a place for fuel to leak or air to sneak in, so fewer parts that are in better shape is the goal.

If you are still sorting out your build, our fuel tanks and parts collection has the tanks, collars, caps and petcocks in one place, and the engines and parts collection covers everything on the other end of the line.

Choosing a Tank Style

Plastic upright tanks

The Plastic 3 Quart Upright Fuel Tank includes the cap and suction unit, and the collar for the steering post is sold separately. If you want it all in one box, the 3 Quart Upright Tank and Mounting Collar bundles the two. Stepping up, the Plastic 5 Quart Upright Fuel Tank is listed for open and intermediate karts and also ships with the cap and suction unit.

The standalone Fuel Tank Mounting Collar has a metric mounting stud, is made for our 3 and 5 quart plastic tanks, and also fits PRC and PMI 3 quart plastic upright tanks. It is built for the industry standard 1 inch steering post.

Plastic 2 quart tank

The Plastic 2qt. Fuel Tank is the budget-friendly, heavy-duty option. It comes with a breather cap, a fuel shut-off valve and a breather hose. One thing to know before you start: the petcock goes into a pre-designated hole that you have to drill and tap yourself, so plan that into your install time.

Aluminum post-mounted tanks

If you like a cleaner look and a quick visual on fuel level, the aluminum tanks have a sight glass on the side. They are powder coated flat black, with an aluminum cap, a steel petcock and an adjustable clamp for a 1 inch steering post. The 2 Quart Aluminum Post Mounted Tank measures 6.25 inches tall by 6 inches wide, and the 3 Quart Aluminum Post Mounted Tank is 8.25 inches tall by 6 inches wide. Measure your steering wheel clearance and where your hands and tach will sit before you pick the taller one.

How Much Tank Do You Actually Need?

Start with your rulebook, because some classes and tracks have their own tank rules. After that it is a trade: more fuel means more run time without a worry, but fuel is weight. Gasoline is roughly 6 pounds a gallon, so a quart is around a pound and a half, and that sits high and forward. If you are right at the scale limit, our minimum weight guide covers where every pound goes. Longer features, hotter days and thirstier engines are reasons to lean larger. Short heat races and a kart that is already heavy are reasons to stay small.

Mounting It Right

The steering post is also where your front end loads come through, so a tank that is loose or slightly crooked gets noticed fast. A few habits help:

  • Slide the collar to a spot that clears the steering wheel, your knees and any tach mount.
  • Snug the collar evenly, then check it again after the first practice session.
  • Keep the tank straight and upright so the suction unit can pick up fuel through the whole run.
  • Route the line so it never rubs on the post, the wheel hub or anything that moves.

While you have the front end apart, it is a good time to review your steering setup with our front end and steering guide.

Petcock, Cap and Line: The Small Parts That Strand You

The steel fuel petcock has a 1/8 inch thread and fits 1/4 inch fuel line, so it works for a tank or a catch can. A shut-off lets you stop fuel flow when you haul the kart or pull the line. The cap on a plastic tank is a vent as well as a lid, and a plugged vent can starve the engine, so if yours is cracked, stiff or beat up, a replacement cap for 3 and 5 quart tanks is cheap insurance. Replace old, hardened fuel line while you are at it.

Fuel Problems That Look Like Engine Problems

Before you tear into the carburetor, rule out the tank side. A kart that bogs late in a run, surges in the corners or dies on a hard stop can be fighting a clogged vent, a pinched line, a sucking-air connection or dirt in the tank. If the tank side checks out, then move on to our clone carburetor jetting guide. Clean fuel matters too, and our fuel, oil and filter maintenance guide covers the habits that keep it that way.

Tank Checks to Add to Your Routine

  1. Inspect the tank body, seams and mounting points for cracks or rubbing.
  2. Test the cap vent and confirm it is not blocked with dirt.
  3. Check the line for stiffness, cracks and loose clamps.
  4. Operate the petcock and look for weeping around the fittings.
  5. Confirm the collar and stud are still tight.

Run through the same list during your off-season teardown, and after any new engine work such as a fresh break-in, a smooth fuel supply makes it easier to read what the engine is telling you. If you log your runs, our RPM and head temp guide shows how to read those numbers.

Frequently Asked Questions

What size fuel tank do I need for an outlaw kart?

It depends on your class, your engine and how long your features run, so check your track's rulebook first. Toigo carries 2, 3 and 5 quart options. The 5 quart plastic upright tank is listed for open and intermediate karts, while the 2 and 3 quart tanks suit shorter runs and tighter weight budgets.

Where does the fuel tank mount on an outlaw kart?

Most upright tanks clamp to the 1 inch steering post with a mounting collar. The Toigo plastic 3 and 5 quart tanks use a collar with a metric mounting stud that is sold separately, or in a combo with the 3 quart tank.

Do I need a petcock on my kart fuel tank?

A shut-off valve lets you stop fuel flow when you pull the line, park the kart or haul it. The aluminum tanks come with a steel petcock, the plastic 2 quart comes with a shut-off valve, and the steel petcock is also sold separately with a 1/8 inch thread for 1/4 inch fuel line.

How much does fuel weigh in a kart tank?

Gasoline weighs roughly 6 pounds per gallon, so a quart is around a pound and a half. A full 3 quart tank adds a few pounds up high on the steering post, which matters when you are chasing minimum weight.

How often should I check my kart fuel tank and lines?

Look it over every time you service the kart. Check the cap vent, the suction line, the petcock and the clamp for cracks, leaks or loose hardware, and replace anything that looks tired before it costs you a race.

Get the Right Tank for Your Kart

Browse the full fuel tanks and parts collection, or call the shop if you are not sure which tank, collar and petcock fit your build. If the motor itself needs attention, take a look at our engine rebuild service.


0 comments

Leave a comment