We have improved these again! Now 1/4 inch shorter to allow you to move your hubs in and out to dial in your setup. Even lighter now, with a smaller bearing spacer, but still just as strong. With the recessed pocket for the stud to fit flush into the backside of the hub you get that press in look, without the press in problems! Made from 7075 aluminum. Hub comes with bearings, steel studs and nuts. Cut rotating weight and look good doing it!
Titanium studs and nuts available
Can be used on smaller karts as right front.
(Pictured with steel (gold color)
Weights (No studs, bearings, spacers, or races):
LF - 74g
RF Sealed - 41g
RF Tapered - 109g
RF Big Bell Sealed - 151g
RF Big Bell Tapered - 152g
Weights Fully Loaded:
LF - Steel 207g/Ti 187g
RF Sealed - Steel 273g/Ti 253g
RF Tapered - Steel 330g/Ti 311g
RF Big Bell Sealed - Steel 325g/Ti 296g
RF Big Bell Tapered - Steel 373g/Ti 353g
LF - Steel 207g/Ti 187g
RF Sealed - Steel 273g/Ti 253g
RF Tapered - Steel 330g/Ti 311g
RF Big Bell Sealed - Steel 325g/Ti 296g
RF Big Bell Tapered - Steel 373g/Ti 353g