Trusted by racers since 1985
- Secure SSL checkout — all major cards accepted
- Ships fast from our Newton, Iowa Store & Showroom
- Not sure it fits? Text or call a racer: 785-341-7301
Product Details
THIS DOES NOT INCLUDE THE TOP WASHER BOX.
IF YOU HAVE THE TOP WASHER BOX YOU CAN ADD THIS STAND AND MOTOR SO YOU DON'T HAVE TO USE A DRILL.
- All aluminum construction
- Includes Stand and Motor
- Features a heating probe and thermostat to warm the water
- Has an easy on/off hub for attaching the tire – no nuts involved!
- Built-in drain plug for easy removal of water
- Has a double receptacle and switch for the heating probe
Instructions for motor stand install
- Position the washer on the stand. Make sure the washer is flush with the front edge and the right side of the stand.
- Mark and drill the mounting holes. Once the washer is positioned correctly, mark the mounting holes in the bottom of the stand, then drill the holes.
- Bolt the washer to the stand. Apply a small amount of silicone to the bolts before tightening them down. This will help prevent water from leaking through the mounting holes.
- Install the pulley and belt.
- Adjust the motor to tighten the belt. Move the motor as needed until the belt has the proper tension, then tighten the motor mounting bolts.
- Mount the pulley cover. Center the cover over the pulleys and belt, making sure it is evenly spaced on the top, bottom, left, and right sides.
- Secure the pulley cover once it is centered and has enough clearance around the pulleys and belt.