{"title":"Five Three Titanium","description":"\u003cp\u003eFive Three Titanium lightweight titanium, aluminum and steel racing components for outlaw karts, junior sprints, quarter midgets, micro sprints and TQ midgets. Browse the full line by category.\u003c\/p\u003e","products":[{"product_id":"revolver-hubs-1-4-28-dual-pinch-bolt-rear-hub","title":"Revolver Hubs - 1\/4-28 Dual Pinch Bolt Rear Hub","description":"\u003cp\u003eThe Revolver dual pinch bolt rear hub is the extra-security option in the Revolver rear hub line, built for outlaw kart and go kart rear axles. Two pinch bolts instead of one clamp the hub down harder, so it will not walk or spin on the axle when the track goes slick and the kart is loading and unloading the rear end.\u003c\/p\u003e\u003cp\u003eLike the rest of the Revolver line, this hub is designed to cut rotating weight, which is the weight that hurts acceleration the most. Less mass out at the wheel means the engine gets the kart moving sooner off the corner, and the machined Revolver profile stands out on the kart while it does it.\u003c\/p\u003e\u003cp\u003eThe hub is made to hold up to the forces of racing and is machined to pair with our low profile studs, so the head of the stud sits flush and does not stick out past the hub face.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication: outlaw kart and go kart rear axle\u003c\/li\u003e\n\u003cli\u003eTakes three 1\/4-28 studs\u003c\/li\u003e\n\u003cli\u003eTakes two 5\/16-18 pinch bolts\u003c\/li\u003e\n\u003cli\u003eMachined for low profile studs so the head sits flush\u003c\/li\u003e\n\u003cli\u003eWeight, hub only: 140 g\u003c\/li\u003e\n\u003cli\u003eWeight with titanium hardware: 182 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note: these hubs do NOT come with hardware. Studs, nuts and pinch bolts are sold separately, and titanium studs are NOT recommended for use on syrup tracks indoors.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":45379162833084,"sku":"FTRHRHQD","price":37.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_587849fc-2614-4629-b242-df45c42225d6.jpg?v=1787601908"},{"product_id":"revolver-hub-rear-brake-hub","title":"Revolver Hub - 3 Bolt Rear Brake Hub","description":"\u003cp\u003eThe Revolver 3 bolt rear brake hub carries your brake rotor on the rear axle of an outlaw kart or go kart. It is machined from 7075 aluminum, bored at 1.25 in to drop straight onto a standard rear axle, and priced to compete with the plain hubs it replaces.\u003c\/p\u003e\u003cp\u003eAt almost 10 g lighter than other brake hubs, it takes weight off the fastest-spinning part of the kart, and 7075 is stiff enough to keep the rotor running true under hard braking instead of flexing and cooking pads. It looks a lot better than a stock hub while it does it.\u003c\/p\u003e\u003cp\u003eChoose it bare, or paired with our titanium bolt kit, which includes the pinch bolt and three rotor bolts drilled and ready to be safety wired. If titanium is not your thing, the steel option gives you drilled steel rotor bolts with a non-drilled steel pinch bolt.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 7075 aluminum\u003c\/li\u003e\n\u003cli\u003eAxle bore: 1.25 in\u003c\/li\u003e\n\u003cli\u003ePinch bolt: one 1\/4-28\u003c\/li\u003e\n\u003cli\u003eRotor bolts: three 5\/16-24\u003c\/li\u003e\n\u003cli\u003eWeight, bare: 67 g +\/- 2 g\u003c\/li\u003e\n\u003cli\u003eWeight with titanium hardware: 84 g +\/- 2 g\u003c\/li\u003e\n\u003cli\u003eWeight with steel hardware: 97 g +\/- 2 g\u003c\/li\u003e\n\u003cli\u003eTitanium rotor bolts drilled for safety wire\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment note: some other brake hubs use a different pinch bolt size, so check yours before reusing old hardware. Rotor is sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Hub Only","offer_id":45379166044348,"sku":"FTRRHBHB","price":32.24,"currency_code":"USD","in_stock":true},{"title":"Hub With Ti Hardware","offer_id":47335623950524,"sku":"FTRRHBHT","price":57.34,"currency_code":"USD","in_stock":true},{"title":"Hub With Steel Hardware","offer_id":47335623983292,"sku":"FTRRHBHS","price":37.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_1cbac53f-3bce-4482-845b-3264fb51d922.jpg?v=1787601963"},{"product_id":"revolver-hubs-right-front-big-bell-sealed-bearing","title":"Revolver Hubs - 1\/4-28 Right Front Big Bell Sealed Bearing","description":"\u003cp\u003eThe Revolver Big Bell right front hub with sealed bearings is built for outlaw karts and go karts that lean hard on the right front. The larger bell increases the contact patch between the hub and the back of the wheel, which cuts flex between the two when side load builds through the corner.\u003c\/p\u003e\u003cp\u003eIf you have ever pulled a right front wheel and found the imprint of the hub pressed into the back of it, that is exactly the flex this hub solves. Spreading the load across a bigger face keeps the wheel sitting flat instead of working against the studs.\u003c\/p\u003e\u003cp\u003eThis version runs sealed straight ball bearings, which keep track dirt and moisture out of the races and are the simple, low-maintenance choice for most setups. Machined from 7075 aluminum, it cuts rotating weight at the end of the spindle and looks good doing it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 7075 aluminum\u003c\/li\u003e\n\u003cli\u003eStud thread: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eBearings: sealed straight ball, stepped 5\/8 in and 3\/4 in, included\u003c\/li\u003e\n\u003cli\u003eBig Bell design for a larger wheel contact patch and less flex\u003c\/li\u003e\n\u003cli\u003eWeight, bare hub with no studs, bearings, spacers or races: 159 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStuds, nuts and dust covers are sold separately. This hub uses one right front sealed dust cover and one left front \/ right front outer dust cover. Please note: titanium studs are NOT recommended for use on syrup tracks indoors.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":45379170107580,"sku":"FTRHBBSS","price":53.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/20260306-131929.jpg?v=1787602112"},{"product_id":"complete-titanium-two-disk-clutch","title":"Complete Titanium Two Disk Clutch","description":"\u003cp\u003eA fully built two disk racing clutch for junior sprint, outlaw kart, quarter midget and micro sprint karts. It is assembled around our titanium upgrade parts, special frictions, coated steel levers and our own aluminum clutch basket, so it arrives ready to bolt on.\u003c\/p\u003e\u003cp\u003eThe complete assembly, basket and gear hub included, weighs just 1.758 lbs (798 g) — lighter than most single disk packages while carrying twice the friction area. The second disk spreads the load, so the pack runs cooler and holds engagement RPM consistently over a long main instead of fading as the frictions heat up. Titanium in the hub, plate and hardware handles that heat without corroding or stretching.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo disk configuration\u003c\/li\u003e\n\u003cli\u003eTitanium drive hub, pressure plate and hardware\u003c\/li\u003e\n\u003cli\u003eSpecial friction discs and coated steel levers\u003c\/li\u003e\n\u003cli\u003eIncludes our aluminum clutch basket\u003c\/li\u003e\n\u003cli\u003eComplete assembly weight: 1.758 lbs (798 g) with basket and gear hub\u003c\/li\u003e\n\u003cli\u003eCan be set up with red or black springs to suit your engagement RPM\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAdd a note to your order with your class, target engagement RPM or preferred spring setting before it ships and we will build it to spec. Add a gear driver and a snap ring and you are ready to race. Drive gear, gear driver and snap ring are sold separately. Clutches are built to order, so please allow 1-2 business days lead time.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":45379173908668,"sku":"FTTFBC2D","price":682.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_f1a3fb40-97d0-4b6b-a7f6-69645d168948.jpg?v=1787601941"},{"product_id":"revolver-hubs-left-front","title":"Revolver Hubs - 1\/4-28 Left Front","description":"\u003cp\u003eThe Revolver 1\/4-28 left front hub is the standard non-stepped front hub for outlaw karts and go karts, machined from 6061 aluminum. It runs two 5\/8 in small bearings, which makes it the right hub for non-stepped spindles, and on smaller karts it can also be run as a right front.\u003c\/p\u003e\u003cp\u003eThis version has been improved again: it is now a full 1\/4 in shorter, so you have more room to move the hubs in and out and dial in your front end width and scrub. A smaller bearing spacer makes it lighter than the hub it replaces, without giving up strength.\u003c\/p\u003e\u003cp\u003eA front hub is rotating weight sitting at the end of the spindle, so trimming mass here shows up in acceleration and in how quickly the front end responds. The machined Revolver profile means you cut that weight and still look good doing it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 6061 aluminum\u003c\/li\u003e\n\u003cli\u003eStud thread: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eBearings: two 5\/8 in small bearings, included\u003c\/li\u003e\n\u003cli\u003eFor non-stepped spindles\u003c\/li\u003e\n\u003cli\u003e1\/4 in shorter than the previous version\u003c\/li\u003e\n\u003cli\u003eWeight, bare hub with no studs, bearings, spacers or races: 76 g\u003c\/li\u003e\n\u003cli\u003eCan be run as a right front on smaller karts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHub comes with two 5\/8 in bearings. Studs, nuts and dust covers are sold separately, and this hub uses two of the left front \/ right front outer dust covers. Pictured with steel (gold color) and titanium (grey color) hardware. Please note: titanium studs are NOT recommended for use on syrup tracks indoors.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":45379181838524,"sku":"FTRHLFSS","price":41.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_25160b87-9d25-467a-8d57-331fba48afe6.jpg?v=1787602047"},{"product_id":"steel-1-4-28-lug-stud-flush-head","title":"Steel 1\/4-28 Lug Stud Flush Head","description":"\u003cp\u003eZinc-coated \u003cstrong\u003e1\/4-28 wheel stud\u003c\/strong\u003e with a bullet nose for fast, accurate tire changes on go karts, outlaw karts and quarter midgets. The lightweight flush head sits even with the back side of the hub, and an internal 1\/8\" hex broach lets you drive the stud without chewing up the head.\u003c\/p\u003e\u003cp\u003eThe colorful zinc finish gives it far better corrosion resistance than a bare stud, so it holds up season after season in wet and muddy conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eHead: lightweight flush \/ flat head\u003c\/li\u003e\n\u003cli\u003eDrive: internal 1\/8\" hex\u003c\/li\u003e\n\u003cli\u003eMaterial: zinc-coated carbon steel\u003c\/li\u003e\n\u003cli\u003eWeight: 7.6 g each\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA budget-friendly steel alternative to titanium studs, and the recommended choice for indoor syrup tracks where titanium studs are not advised. Sold individually. Lug nuts sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318416326844,"sku":"FTSRHLW1","price":1.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_5d709d3a-5f13-41b2-a851-4e75ce27ba79.jpg?v=1787601583"},{"product_id":"complete-titanium-three-disk-junior-sprint-clutch","title":"Complete Titanium Three Disk \/ Junior Sprint Clutch","description":"\u003cp\u003eA complete, fully assembled three disk titanium racing clutch built for junior sprint karts and other bully-style clutch applications on outlaw karts and clone\/Predator go kart engines. It arrives ready to run — just add a gear driver and a snap ring and bolt it on.\u003c\/p\u003e\u003cp\u003eThis clutch is built out as a three disk unit using our titanium upgrade components, our special friction disks, coated steel levers and our aluminum clutch basket. Replacing the steel internals with titanium strips rotating weight off the crankshaft, which sharpens throttle response and lets the engine pick up RPM faster out of the corner. Titanium also shrugs off the heat and corrosion that punish a hard-working kart clutch.\u003c\/p\u003e\u003cp\u003eEvery clutch is set up to order, or you can take our standard Junior Sprint configuration: double bolts on the levers for weight, black springs, and engagement between 4800 and 5000 RPM.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThree disk bully-style clutch, fully assembled\u003c\/li\u003e\n\u003cli\u003eTitanium drive hub, pressure plate and floaters\u003c\/li\u003e\n\u003cli\u003eFive Three Titanium special friction disks\u003c\/li\u003e\n\u003cli\u003eCoated steel clutch levers\u003c\/li\u003e\n\u003cli\u003eAluminum clutch basket included\u003c\/li\u003e\n\u003cli\u003eComplete weight with basket and gear hub: 2.2 lbs\u003c\/li\u003e\n\u003cli\u003eStandard Junior Sprint setup: double lever weight bolts, black springs, 4800–5000 RPM engagement\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGear driver and snap ring are sold separately. Please leave a note with your order listing your class, RPM target or preferred settings so we can set the clutch up for you. Clutches are built to order — please allow 1–2 business days lead time.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318417866940,"sku":"FTTFBC3D","price":767.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_482076f3-47a1-4e3f-af9a-c139ab0649c1.jpg?v=1787601769"},{"product_id":"vented-aluminum-go-kart-clutch-baskets","title":"Vented Aluminum Go Kart Clutch Baskets","description":"\u003cp\u003eThe Vented Aluminum Go Kart Clutch Basket is a direct-fit replacement basket for Bully style clutches and gears used in outlaw kart, junior sprint, quarter midget and micro sprint racing. Machined from 6061 aluminum and black anodized, it is offered in one, two and three disk widths.\u003c\/p\u003e\u003cp\u003eThe vent slots pull heat out of the clutch pack, which is where premature friction and lever wear starts on tracks that build temperature. Even in cooler conditions the vented pockets strip rotating weight off the clutch, so the engine spins up quicker off the corner.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 6061 aluminum, black anodized\u003c\/li\u003e\n\u003cli\u003eFits Bully style clutches and gears\u003c\/li\u003e\n\u003cli\u003eSizes: One Disk, Two Disk, Three Disk\u003c\/li\u003e\n\u003cli\u003eBasket weight: Two Disk 83.8 g, Three Disk 87.8 g\u003c\/li\u003e\n\u003cli\u003eVented construction for heat management and reduced rotating weight\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note: because of the vents, chain lube is more likely to work its way into the clutch and cause slipping, so keep lube application light and inspect the pack often. Basket only. Clutch, drive gear, snap ring and drive hub are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"One Disk Basket","offer_id":47318417899708,"sku":"FTAVCB1D","price":59.24,"currency_code":"USD","in_stock":true},{"title":"Two Disk Basket","offer_id":47318417932476,"sku":"FTAVCB2D","price":64.24,"currency_code":"USD","in_stock":true},{"title":"Three Disk Basket","offer_id":47318417965244,"sku":"FTAVCB3D","price":69.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/Vented2DTop.png?v=1787601788"},{"product_id":"titanium-clutch-set-screw","title":"Titanium Clutch Set Screw","description":"\u003cp\u003eTitanium set screw for the clutch basket on bully style go kart clutches — the same clutches found on outlaw karts, junior sprints and clone\/Predator kart engines. It threads into the basket and holds your snap ring in place so the gear cannot rotate and back itself out.\u003c\/p\u003e\u003cp\u003eMachined from titanium, it saves weight over the stock hardware and will not rust or seize when you tear the clutch down for cleaning. A small part, but the one that keeps your gear where it belongs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread: #4-40 x .185\u003c\/li\u003e\n\u003cli\u003eHead style: button head\u003c\/li\u003e\n\u003cli\u003eDrive: 1\/16 in. allen\u003c\/li\u003e\n\u003cli\u003eMaterial: titanium\u003c\/li\u003e\n\u003cli\u003eFunction: retains the gear snap ring in the clutch basket\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDesigned for bully style clutches. Sold individually.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318418030780,"sku":"FTTCSSBS","price":1.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_328df014-e5c0-401d-a90e-ee3442f11045.jpg?v=1787601793"},{"product_id":"clutch-gear-needle-roller-bearing","title":"Clutch Gear Needle Roller Bearing","description":"\u003cp\u003eReplacement needle roller bearing for go kart clutch drive gears. It presses into the bore of size 12 through 20 tooth clutch gears used on Bully style clutches in outlaw kart, junior sprint, quarter midget and micro sprint racing.\u003c\/p\u003e\u003cp\u003eThe needle bearing is what lets the gear freewheel on the clutch snout, so a worn or notchy bearing shows up as drag, heat and inconsistent engagement. It is a cheap part to replace on a rebuild and one of the first things to check when a clutch stops releasing cleanly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh quality needle roller bearing\u003c\/li\u003e\n\u003cli\u003eFits clutch drive gears from 12T through 20T\u003c\/li\u003e\n\u003cli\u003eIdentical to the bearing supplied in our titanium clutch gears\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold individually as a bearing only. Clutch gear, snap ring and clutch assembly are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318418096316,"sku":"FTIKOCCB","price":9.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/Clutch_needle_roller_bearing.jpg?v=1787601802"},{"product_id":"clutch-lever-nut-for-weight-10-32","title":"Clutch Lever Nut for Weight #10-32","description":"\u003cp\u003eStainless #10-32 nyloc nut used to lock the weight bolts onto the clutch levers in bully style go kart clutches — the clutch found on outlaw karts, junior sprints and clone\/Predator kart engines. Add or remove lever weight to tune engagement, then lock it down with these.\u003c\/p\u003e\u003cp\u003eMade from 316 stainless steel, so they will not corrode when the clutch is washed down and serviced between race nights. The nylon insert keeps them from backing off under the vibration and heat a kart clutch lives with.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread: #10-32\u003c\/li\u003e\n\u003cli\u003eMaterial: 316 stainless steel\u003c\/li\u003e\n\u003cli\u003eType: nyloc (nylon insert lock nut)\u003c\/li\u003e\n\u003cli\u003eUse: retains clutch lever weight bolts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePairs with our #10-32 x 1\/2 stainless clutch lever weight bolts, sold separately. Sold individually.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318418161852,"sku":"MC1032LN","price":0.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/background-editor_output_e17218c7-de45-4961-a1bc-bc1eb00ec997.png?v=1787601818"},{"product_id":"junior-sprint-front-hub","title":"Junior Sprint Front Hub","description":"\u003cp\u003eThe Junior Sprint Front Hub is a fully sealed front wheel hub built for junior sprint karts, developed together with Area 54 LLC. It takes the tried-and-true hub design used in sprint cars and micro sprints and scales it down for the junior sprint world, and should fit most junior sprint chassis.\u003c\/p\u003e\u003cp\u003eTapered inner and outer bearings keep rolling resistance to a minimum while still carrying the heavy side loads a front hub sees mid-corner. A screw-on outer dust cover and a bolted-in inner seal close the hub off from dust, debris, and moisture, which means you can run either grease or oil inside it.\u003c\/p\u003e\u003cp\u003eThe screw-on outer dust cover uses an offset fill screw, so topping the hub off with oil between heats is quick and mess-free. Sealing the hub also keeps track dirt out of the bearings, which is what usually kills front hub bearings on a junior sprint over a long season.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication: junior sprint front hub; fits most junior sprint chassis\u003c\/li\u003e\n\u003cli\u003eTapered inner and outer bearings included\u003c\/li\u003e\n\u003cli\u003eFully sealed: bolted-in inner seal plus screw-on outer dust cover\u003c\/li\u003e\n\u003cli\u003eRuns grease or oil\u003c\/li\u003e\n\u003cli\u003eOffset fill screw in the outer dust cover for easy oil fill\u003c\/li\u003e\n\u003cli\u003eIncludes steel 3\/8-16 hardware\u003c\/li\u003e\n\u003cli\u003eWeight, hub only: 388 g\u003c\/li\u003e\n\u003cli\u003eWeight, fully loaded: 750 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold individually, so order two for a complete front end. Bearings and steel 3\/8-16 hardware are included.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318418260156,"sku":"A54JSFHS","price":149.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_5b775102-2aa7-49e7-bf06-964425034d0e.jpg?v=1787601834"},{"product_id":"tigear-sprockets-titanium-clutch-drive-gear-35-pitch","title":"TiGEAR Sprockets - Titanium Clutch Drive Gear #35 PITCH","description":"\u003cp\u003eTiGEAR Sprockets by Five Three Titanium are Grade 5 titanium clutch drive gears cut for #35 pitch chain. They mount to Bully style clutch baskets on outlaw kart, junior sprint, quarter midget and micro sprint karts, and are offered from 12 to 20 teeth so you can dial gearing track to track.\u003c\/p\u003e\u003cp\u003eTitanium gives the strength of steel at roughly half the density, and the drive gear is the furthest mass out on the clutch, so weight taken off here counts double. Dropping that rotating mass sharpens throttle response and lets the engine pull up through the RPM range faster off the corner. Grade 5 titanium also shrugs off the corrosion that eats steel gears between race weekends.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Grade 5 titanium\u003c\/li\u003e\n\u003cli\u003eChain pitch: #35\u003c\/li\u003e\n\u003cli\u003eTooth counts: 12T, 13T, 14T, 15T, 16T, 17T, 18T, 19T, 20T\u003c\/li\u003e\n\u003cli\u003eFits Bully style clutch baskets\u003c\/li\u003e\n\u003cli\u003eAccepts a standard clutch gear needle roller bearing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold as a gear only, one tooth count per order. Needle roller bearing or bushing, gear snap ring, clutch basket and clutch assembly are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"12T","offer_id":47318418292924,"sku":"FTTCG12T","price":55.24,"currency_code":"USD","in_stock":true},{"title":"13T","offer_id":47318418325692,"sku":"FTTCG13T","price":56.24,"currency_code":"USD","in_stock":true},{"title":"14T","offer_id":47318418358460,"sku":"FTTCG14T","price":57.24,"currency_code":"USD","in_stock":true},{"title":"15T","offer_id":47318418391228,"sku":"FTTCG15T","price":58.24,"currency_code":"USD","in_stock":true},{"title":"16T","offer_id":47318418423996,"sku":"FTTCG16T","price":59.24,"currency_code":"USD","in_stock":true},{"title":"17T","offer_id":47318418456764,"sku":"FTTCG17T","price":60.24,"currency_code":"USD","in_stock":true},{"title":"18T","offer_id":47318418489532,"sku":"FTTCG18T","price":61.24,"currency_code":"USD","in_stock":true},{"title":"19T","offer_id":47318418522300,"sku":"FTTCG19T","price":62.24,"currency_code":"USD","in_stock":true},{"title":"20T","offer_id":47318418555068,"sku":"FTTCG20T","price":63.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_e8c2449b-ed36-4c0b-965d-46bc56b30576.jpg?v=1787601835"},{"product_id":"clutch-lever-bolt-for-weight-10-32-x-1-2","title":"Clutch Lever Bolt for Weight #10-32 x 1\/2","description":"\u003cp\u003eStainless #10-32 x 1\/2 in. bolt used to add weight to the levers in a bully style go kart clutch — the clutch used on outlaw karts, junior sprints and clone\/Predator kart engines. Lever weight is one of the main tuning levers you have for setting engagement RPM, so keep a handful of these in the trailer.\u003c\/p\u003e\u003cp\u003eMade from 18-8 stainless steel, so they will not corrode when you pull the clutch apart, wash it and put it back together week after week. Run one or two per lever depending on your class and application.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread: #10-32\u003c\/li\u003e\n\u003cli\u003eLength: 1\/2 in.\u003c\/li\u003e\n\u003cli\u003eMaterial: 18-8 stainless steel\u003c\/li\u003e\n\u003cli\u003eUse: lever weight bolt for bully style clutches\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePairs well with our coated steel and stainless clutch levers and our #10-32 nyloc lever nuts, all sold separately. Sold individually.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318418587836,"sku":"MC103212","price":0.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/background-editor_output_5de086ca-797d-4fcd-9580-388e977f12a0.png?v=1787601843"},{"product_id":"outlaw-kart-titanium-left-front-brake-studs","title":"Outlaw Kart Titanium Left Front Brake Studs","description":"\u003cp\u003eTitanium left front brake studs for outlaw karts. They are made to fit the Hegar hub and may fit other left front brake hubs, and they line up perfectly with our titanium brake rotors. Sold as a three pack, which is exactly what one left front brake rotor needs.\u003c\/p\u003e\u003cp\u003eBrake studs live at the outer edge of a spinning rotor, so every gram you take off them is rotating weight the engine no longer has to accelerate out of the corner. These studs come in lighter than the OE steel hardware while still standing up to the clamping torque of hard braking, and titanium shrugs off the rust and corrosion that seizes steel studs into an aluminum hub after a wet weekend.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: titanium\u003c\/li\u003e\n\u003cli\u003eThread: 5\/16-18\u003c\/li\u003e\n\u003cli\u003eDrive: 3\/16 in Allen (socket head)\u003c\/li\u003e\n\u003cli\u003eHead outside diameter: 0.3 in\u003c\/li\u003e\n\u003cli\u003eLength: 1 in\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 4.4 g each, approx. 13 g for the set of three\u003c\/li\u003e\n\u003cli\u003eSold as a three pack\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment: made for the Hegar left front brake hub; may fit others, so check your stud length and thread before ordering. Rotor and nuts sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318418620604,"sku":"FTTOKBB3","price":14.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_aa809db7-e30b-4ddd-852e-ffe1d3d2f3b0.jpg?v=1787601856"},{"product_id":"clutch-shims","title":"Clutch Shims","description":"\u003cp\u003eClutch shims used to set the air gap on Bully style go kart clutches in outlaw kart, junior sprint, quarter midget and micro sprint racing. They bolt under the lever plate on the drive hub, so you can fine-tune the gap without swapping frictions or floaters.\u003c\/p\u003e\u003cp\u003eAir gap is what controls how far the levers have to travel before the pack locks up, and it grows as the frictions wear. Shimming it back into spec restores consistent engagement RPM and keeps the clutch from slipping and cooking itself on a long main.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGold shim: .005 inch thick\u003c\/li\u003e\n\u003cli\u003eSilver shim: .010 inch thick\u003c\/li\u003e\n\u003cli\u003eInstalls under the lever plate on the clutch drive hub\u003c\/li\u003e\n\u003cli\u003eColor coded so you can identify thickness at a glance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold individually. Running more than four shims is generally not recommended. Lever plate, drive hub and clutch assembly are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Gold - .005 inch","offer_id":47318418653372,"sku":"CKSCS005","price":3.0,"currency_code":"USD","in_stock":true},{"title":"Silver - .010 inch","offer_id":47318418686140,"sku":"CKSCS010","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_4440f94e-523f-4c59-9e5d-caf580260729.jpg?v=1787601856"},{"product_id":"titanium-specific-clutch-friction-disk","title":"Titanium Specific Clutch Friction Disk","description":"\u003cp\u003eOur own friction disk, built to fit bully style clutches on outlaw karts, junior sprints and clone\/Predator go kart engines. Years in the making and revised more than once to get the fit and the feel right, it works in both steel and titanium clutch packs.\u003c\/p\u003e\u003cp\u003eThe advantage over a standard disk is the compound. It is more durable and it grabs harder inside the clutch, so you get less slip on the hit and more consistent engagement as the pack heats up over a long main. Like our special brake pads, the material bites into steel with less slip and stands up to the torque and internal bite a titanium clutch puts into it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter to friction material: 3.49 in.\u003c\/li\u003e\n\u003cli\u003eTang to tang: 3.99 in.\u003c\/li\u003e\n\u003cli\u003eInside diameter: 2.76 in.\u003c\/li\u003e\n\u003cli\u003eTang width: .5 in.\u003c\/li\u003e\n\u003cli\u003eThickness: .1260 in.\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 59 g\u003c\/li\u003e\n\u003cli\u003eWorks in both steel and titanium clutches\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMade to fit a bully style clutch. Sold individually — order the quantity your one, two or three disk pack calls for.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318418718908,"sku":"FTTBSCFD","price":28.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_67158fba-f4e5-4412-aed1-8ffbe8513e4b.jpg?v=1787601870"},{"product_id":"clutch-bearing-snout-end-snap-ring","title":"Clutch Bearing Snout End Snap Ring","description":"\u003cp\u003eThis is the snap ring that retains the bearing race in the basket bore on Bully style go kart clutches used in outlaw kart, junior sprint, quarter midget and micro sprint racing. It captures the race at the snout end of the clutch.\u003c\/p\u003e\u003cp\u003eBecause our bearing race is a separate piece from the rest of the clutch, this ring is all that has to come out to service or replace the race. That makes a between-heats bearing swap a two-minute job instead of a full teardown, and it means a worn race never forces you to scrap a good basket.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRetains the bearing race in the clutch basket bore\u003c\/li\u003e\n\u003cli\u003eFits the snout end of Bully style clutches\u003c\/li\u003e\n\u003cli\u003eWorks with our separate, serviceable bearing race design\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease make sure your end play is set as close to .030 inch as possible after installation. Sold as a snap ring only. Bearing race, clutch basket and clutch assembly are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318418751676,"sku":"MCSRBS78","price":0.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_ef0c6c16-66a0-4236-88c3-d0962991defa.jpg?v=1787601873"},{"product_id":"revolver-hub-1-4-28-rear-hub-kit","title":"Revolver Hub - 1\/4-28 Rear Hub Kit","description":"\u003cp\u003eGreat things come in threes. The Revolver Hub Rear Hub Kit packages a matched set of Revolver rear hubs for your outlaw kart or go kart rear axle, and the Revolver 3-bolt rear brake hub is included at no extra charge when you buy the hubs as a kit rather than one at a time.\u003c\/p\u003e\u003cp\u003eRevolver hubs cut rotating weight where it costs you the most, out at the wheel, so the engine spends less effort spinning the rear end up off the corner. Buying them as a kit also means the studs, nuts and pinch bolts all arrive together and matched, instead of chasing loose hardware the night before a race.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication: outlaw kart and go kart rear axle\u003c\/li\u003e\n\u003cli\u003eStud thread: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eEvery kit includes a rear brake hub with rotor bolts and a 1\/4-28 pinch bolt\u003c\/li\u003e\n\u003cli\u003eSix titanium 1\/4-28 studs and six 1\/4-28 nuts with a 1\/2 in wrench-size head\u003c\/li\u003e\n\u003cli\u003eTitanium 5\/16 pinch bolts included as needed for the hubs in the kit\u003c\/li\u003e\n\u003cli\u003eHubs come with external hex head studs\u003c\/li\u003e\n\u003cli\u003eChoose two single pinch bolt hubs, one single and one dual pinch bolt hub, or two dual pinch bolt hubs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHubs do not come with the hardware installed. Rotor is sold separately. Please note: titanium studs are NOT recommended for use on syrup tracks indoors.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Both Single Pinch Bolt","offer_id":47318418784444,"sku":"FTRHRHKS-1","price":148.3,"currency_code":"USD","in_stock":true},{"title":"One Single and One Dual Pinch Bolt","offer_id":47318418817212,"sku":"FTRHRHKS-2","price":162.75,"currency_code":"USD","in_stock":true},{"title":"Both Dual Pinch Bolt","offer_id":47318418849980,"sku":"FTRHRHKS-3","price":166.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_f6699154-0893-4d1e-9b67-13bd26aa381a.jpg?v=1787601886"},{"product_id":"clutch-gear-snap-ring","title":"Clutch Gear Snap Ring","description":"\u003cp\u003eRetaining snap ring that holds the drive gear onto the clutch basket on Bully style go kart clutches used in outlaw kart, junior sprint, quarter midget and micro sprint racing.\u003c\/p\u003e\u003cp\u003eThe gear is under constant chain load trying to walk itself off the snout, and this ring is the only thing holding it there. A tired or spun ring lets the gear pull out mid-race, which usually takes the chain and the gear with it, so it is worth replacing any time the clutch is apart.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRetains the clutch drive gear on the basket snout\u003c\/li\u003e\n\u003cli\u003eFits Bully style clutch baskets and gears\u003c\/li\u003e\n\u003cli\u003eCertain gear sizes may require a spiral snap ring instead of a C-ring\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMake sure you have a #4-40 screw in your basket to keep the ring from rotating, since a spinning ring will let the gear pull out. Sold as a snap ring only. Drive gear, basket and clutch assembly are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318418882748,"sku":"MCSR1716","price":0.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_204d81ae-24c9-4e6f-a1bd-a6f050925c99.jpg?v=1787601890"},{"product_id":"revolver-hub-full-1-4-28-hub-kit","title":"Revolver Hub - Full 1\/4-28 Hub Kit","description":"\u003cp\u003eThe Revolver Hub Full 1\/4-28 Hub Kit puts every Revolver wheel hub Five Three Titanium builds for a 1\/4-28 stud kart into one package, plus a rear brake hub and all the titanium hardware needed to bolt them on. Built for outlaw karts, junior sprints and go karts running 1\/4-28 wheel studs. This is a generic recommended setup and may not work on all karts.\u003c\/p\u003e\u003cp\u003eMachined aluminum Revolver hubs cut rotating weight where it hurts most, so the kart picks up and slows down quicker. The titanium fasteners shed even more weight and shrug off the corrosion and heat that eat steel hardware over a season.\u003c\/p\u003e\u003cp\u003eBought as a kit, the rear brake hub and dust covers come free - roughly a $356 value.\u003c\/p\u003e\u003cp\u003eIncluded parts:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRevolver Hubs - 1\/4-28 Left Front\u003c\/li\u003e\n\u003cli\u003eRevolver Hubs - 1\/4-28 Right Front Sealed Bearing\u003c\/li\u003e\n\u003cli\u003eRevolver Hubs - 1\/4-28 Single Pinch Bolt Rear Hub\u003c\/li\u003e\n\u003cli\u003eRevolver Hubs - 1\/4-28 Dual Pinch Bolt Rear Hub\u003c\/li\u003e\n\u003cli\u003eRevolver Hub - 3 Bolt Rear Brake Hub\u003c\/li\u003e\n\u003cli\u003eRevolver Hub - Dust Cover\u003c\/li\u003e\n\u003cli\u003eTitanium 5\/16-18x1 Rear Hub Pinch Bolt\u003c\/li\u003e\n\u003cli\u003eTitanium 1\/4-28 Lock Collar\/Brake Hub Bolt\u003c\/li\u003e\n\u003cli\u003eTitanium Go Kart Rotor Bolt 5\/16-24 Drilled\u003c\/li\u003e\n\u003cli\u003eTitanium 1\/4-28 Lug Stud External Hex Head\u003c\/li\u003e\n\u003cli\u003eTitanium 1\/4-28 Lug Nut 1\/2in Head\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery kit ships with titanium 1\/4-28 studs and nuts, 5\/16 and 1\/4 pinch bolts, drilled brake bolts and dust covers. Add a rotor, pads and a mini gear hub and you have a full kart ready to go - rotor, pads and gear hub sold separately. Titanium studs are NOT recommended for use on syrup tracks indoors.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318418948284,"sku":"FTRHKIT1","price":311.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_417de34e-d859-4bba-bbc3-fc19c4d11340.jpg?v=1787601893"},{"product_id":"carbon-steel-clutch-thrust-washer","title":"Carbon Steel Clutch Thrust Washer","description":"\u003cp\u003eCarbon steel thrust washer for bully style go kart clutches on outlaw karts, junior sprints and clone\/Predator engines. It sits against the thrust bearing and is offered in two thicknesses so you can shim the clutch to the stack height you want.\u003c\/p\u003e\u003cp\u003eThe washer is black electrolysis coated, which keeps it from corroding through repeated teardowns and lets the thrust bearing spin freely instead of dragging on a rusty surface. Getting the shim stack right is what keeps engagement consistent and stops the clutch from binding as it heats up.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: carbon steel, black electrolysis coated\u003c\/li\u003e\n\u003cli\u003eInside diameter: .87 in.\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 1.37 in.\u003c\/li\u003e\n\u003cli\u003eThin: 1.8 g\u003c\/li\u003e\n\u003cli\u003eThick: 3.6 g\u003c\/li\u003e\n\u003cli\u003eAvailable in thin or thick to shim your clutch\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eChoose thin or thick above. Sold individually. Thrust bearing and bearing race are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Thin","offer_id":47318419144892,"sku":"FTCSTWTN","price":1.56,"currency_code":"USD","in_stock":true},{"title":"Thick","offer_id":47318419177660,"sku":"FTCSTWTK","price":1.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_f551d920-844a-4125-b9c7-cd256f4ca503.jpg?v=1787601904"},{"product_id":"complete-titanium-single-disk-clutch","title":"Complete Titanium Single Disk Clutch","description":"\u003cp\u003eA fully built single disk racing clutch for junior sprint, outlaw kart, quarter midget and micro sprint karts. It is assembled around our titanium upgrade parts, special frictions, coated steel levers and our own aluminum clutch basket, so it arrives ready to bolt on.\u003c\/p\u003e\u003cp\u003eThe whole assembly, including the basket and gear hub, weighs just 2.2 lbs. That is mass hanging off the end of the crank, so taking it out is the cheapest horsepower on the kart: quicker spool up, faster response off the corner and less load on the bearings. Titanium in the hub, plate and hardware also means the parts that see the most heat and abuse do not corrode or stretch the way steel does.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSingle disk configuration\u003c\/li\u003e\n\u003cli\u003eTitanium drive hub, pressure plate and hardware\u003c\/li\u003e\n\u003cli\u003eSpecial friction discs and coated steel levers\u003c\/li\u003e\n\u003cli\u003eIncludes our aluminum clutch basket\u003c\/li\u003e\n\u003cli\u003eComplete assembly weight: 2.2 lbs with basket and gear hub\u003c\/li\u003e\n\u003cli\u003eCan be set up with red or black springs to suit your engagement RPM\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAdd a note to your order with your class, target engagement RPM or preferred spring setting before it ships and we will build it to spec. Add a gear driver and a snap ring and you are ready to race. Drive gear, gear driver and snap ring are sold separately. Clutches are built to order, so please allow 1-2 business days lead time.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318419308732,"sku":"FTTFBC1D","price":597.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_f0ac5c0d-bbec-4bb1-b188-521095dbf1d9.jpg?v=1787601917"},{"product_id":"revolver-hub-mini-gear-hub","title":"Revolver Hub - Mini Gear Hub","description":"\u003cp\u003eThe Revolver Mini Gear Hub completes a full Revolver hub set on an outlaw kart or go kart running a 1.25 inch rear axle. It carries your drive gear on Performance\/PMI and Nitro setups and locks solid to the axle - this hub mounts solid and does not float.\u003c\/p\u003e\u003cp\u003eMachined from 6061 aluminum for strength and anodized black to fight corrosion, it is a one piece design that clamps with a set screw on the keyway, so there are no halves to shift or fret under load. Less rotating weight at the axle means the kart picks up quicker off the corner.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 6061 aluminum, black anodized\u003c\/li\u003e\n\u003cli\u003eFits Performance\/PMI and Nitro gears\u003c\/li\u003e\n\u003cli\u003eOne piece, solid mount - does not float\u003c\/li\u003e\n\u003cli\u003eMade for 1.25 inch axle\u003c\/li\u003e\n\u003cli\u003eFour 1\/4-28 mounting holes plus one 5\/16-24 set screw hole\u003c\/li\u003e\n\u003cli\u003eBolt pattern: 2-9\/16 in diagonally, 1.286 x 2.222 in hole to hole\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 79 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eComes with a stainless set screw; a titanium set screw is coming soon. Our titanium 1\/4-28 hex head studs can be used on this gear hub with either titanium 12 point nuts or aluminum lug nuts - studs and nuts sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318419341500,"sku":"FTARHMGH","price":37.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_0fa58625-3d33-4497-afc6-823c46a2e5f4.jpg?v=1787601917"},{"product_id":"revolver-hubs-1-4-28-single-pinch-bolt-rear-hub","title":"Revolver Hubs - 1\/4-28 Single Pinch Bolt Rear Hub","description":"\u003cp\u003eThe Revolver single pinch bolt rear hub is the lightest hub in the Revolver rear hub line, built for outlaw kart and go kart rear axles. One 5\/16-18 pinch bolt clamps it to the axle, keeping the part count and the weight down for classes and setups that do not need a dual pinch bolt hub.\u003c\/p\u003e\u003cp\u003eRotating weight is the weight that hurts acceleration most, and a rear hub sits right out at the wheel where that penalty is highest. Trimming it here means the engine spins the rear end up quicker off the corner, and the machined Revolver profile stands out on the kart while it does it.\u003c\/p\u003e\u003cp\u003eThe hub is made to hold up to the forces of racing and is machined to pair with our low profile studs, so the head of the stud sits flush and does not stick out past the hub face.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication: outlaw kart and go kart rear axle\u003c\/li\u003e\n\u003cli\u003eTakes 1\/4-28 studs\u003c\/li\u003e\n\u003cli\u003eTakes one 5\/16-18 pinch bolt\u003c\/li\u003e\n\u003cli\u003eMachined for low profile studs so the head sits flush\u003c\/li\u003e\n\u003cli\u003eWeight, hub only: 119 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note: these hubs do NOT come with hardware. We sell discounted three packs of steel and titanium studs and nuts, plus a matching titanium pinch bolt, all sold separately. Titanium studs are NOT recommended for use on syrup tracks indoors.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318419374268,"sku":"FTRHRHSN","price":33.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_e02fff20-18c9-4ff3-9d03-bd878585e8ed.jpg?v=1787601932"},{"product_id":"coated-steel-clutch-levers","title":"Coated Steel Clutch Levers","description":"\u003cp\u003eYellow zinc coated steel clutch levers for bully style clutches — the clutch that runs on outlaw karts, junior sprints and clone\/Predator go kart engines. Levers are a wear item and a tuning item, so buy them in a set and keep a spare pack in the trailer.\u003c\/p\u003e\u003cp\u003eMade from steel with a yellow zinc coating that is not oil based, so it will not corrode or flake off the way a plated lever does when you strip the clutch down and wash it. Consistent lever weight matters: uneven or worn levers make engagement RPM wander from run to run.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: coated steel, yellow zinc finish\u003c\/li\u003e\n\u003cli\u003eFits: bully style clutches\u003c\/li\u003e\n\u003cli\u003eSingle lever weight: 21 g +\/- .3 g (same as our stainless levers)\u003c\/li\u003e\n\u003cli\u003eAvailable in a 6 pack or an 8 pack\u003c\/li\u003e\n\u003cli\u003eCoating is not oil based and holds up to clutch service\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eChoose your pack size above. Lever weight bolts and #10-32 nyloc nuts are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"6 Pack","offer_id":47318419407036,"sku":"FTMCLBS6","price":37.44,"currency_code":"USD","in_stock":true},{"title":"8 Pack","offer_id":47318419439804,"sku":"FTMCLBS7","price":49.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_f967a36b-cd1d-4f78-837a-127c0c36cf62.jpg?v=1787601933"},{"product_id":"revolver-hub-4-bolt-rear-hub","title":"Revolver Hub - 4 Bolt Rear Hub","description":"\u003cp\u003eThis aluminum 4 bolt rear hub is made to fit 1.25 inch rear axles on outlaw karts and go karts. Use it to mount a brake rotor or a rear wheel - it uses the standard 4 bolt MCP brake rotor hole pattern, so it drops straight into most existing brake setups.\u003c\/p\u003e\u003cp\u003eIt is lighter than other 4 bolt rear hubs on the market, and every gram pulled off the axle is rotating weight the engine no longer has to spin up. Machined aluminum also resists the corrosion and heat cycling that pit cast parts over a season.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: aluminum\u003c\/li\u003e\n\u003cli\u003eFits 1.25 inch rear axles\u003c\/li\u003e\n\u003cli\u003eBolt pattern: 4x100, standard 4 bolt MCP brake rotor pattern\u003c\/li\u003e\n\u003cli\u003eMounting holes are not threaded and use a 3\/8 inch bolt\u003c\/li\u003e\n\u003cli\u003eRetained with a 5\/16-18 pinch bolt\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 122 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePairs with our 4 bolt titanium rotor. Rotor, rotor bolts and pinch bolt sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318419472572,"sku":"FTRH4BBH","price":46.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_d87a7d0b-a3fb-4972-a7f6-2bc3cbaf9ee6.jpg?v=1787601936"},{"product_id":"stainless-steel-clutch-levers-6-pack","title":"Stainless Steel Clutch Levers (6 Pack)","description":"\u003cp\u003eA six pack of stainless steel clutch levers for bully style clutches — the clutch used on outlaw karts, junior sprints and clone\/Predator go kart engines. A full set of matched levers is the easiest way to get engagement back to where it was when the clutch was new.\u003c\/p\u003e\u003cp\u003eMachined from 304 stainless steel. Unlike a plated or painted lever, there is no finish to chip or peel when you tear the clutch down and wash it, so the set keeps looking new season after season and will not corrode in storage. Consistent lever weight across all six keeps engagement RPM repeatable run to run.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 304 stainless steel\u003c\/li\u003e\n\u003cli\u003eFits: bully style clutches\u003c\/li\u003e\n\u003cli\u003eQuantity: 6 levers per pack\u003c\/li\u003e\n\u003cli\u003eSingle lever weight: 21 g +\/- .3 g\u003c\/li\u003e\n\u003cli\u003eSix lever set weight: 125 g +\/- .3 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold as a set of six levers. Clutch springs, lever weight bolts and #10-32 nyloc nuts are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318419538108,"sku":"FTSCLBS6","price":64.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_fb8ecb6f-e828-4526-ac55-09feaa4e0089.jpg?v=1787601959"},{"product_id":"revolver-hub-1-4-28-left-front-brake-hub","title":"Revolver Hub - 1\/4-28 Left Front Brake Hub","description":"\u003cp\u003eThe little brother to our 5\/16 left front outlaw kart brake hub. This left front brake hub runs 1\/4-28 wheel studs, so you can put a left front brake on lower power outlaw karts, junior sprints and go karts that are not set up for the larger 5\/16 stud.\u003c\/p\u003e\u003cp\u003eThe sleek Revolver look does not just stand out - the machined pockets cut rotating weight down to help you stay out front. The hub is machined so that our flush head studs sit even with the back side of the hub when installed, giving you a clean press-in look without the press-in problems.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStud size: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eIncludes two 5\/8 inch bearings\u003c\/li\u003e\n\u003cli\u003eIncludes titanium brake floater studs\u003c\/li\u003e\n\u003cli\u003eMachined for flush head studs that sit even with the back of the hub\u003c\/li\u003e\n\u003cli\u003eMade to pair with the Hegar brake rotor and caliper on a keyed spindle\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e1\/4-28 wheel studs and nuts are not included. The titanium Hegar rotor is sold separately; we also offer a larger QRC sized titanium rotor for a QRC caliper, which does not share the same bolt pattern and is not included. Add our titanium left front rotor to cut more weight, and complete the Revolver look by pairing this hub with our right front and rear Revolver Hubs.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318419570876,"sku":"FTRHLFBH-1\/4","price":93.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_1ec40f78-ef91-4c20-99e9-32e693a4f7ec.jpg?v=1787601960"},{"product_id":"stainless-steel-clutch-end-play-washer","title":"Stainless Steel Clutch End Play Washer","description":"\u003cp\u003eAn 18-8 stainless steel washer used to shim the jack shaft or crank shaft and set end play on go kart racing clutches. It drops in behind the clutch drive hub on the clutch bolt, so you can pull the clutch back in when it sits out too far on outlaw kart, junior sprint, quarter midget and micro sprint setups.\u003c\/p\u003e\u003cp\u003eEnd play that is out of spec loads the bearings sideways and lets the clutch wander on the shaft, which chews up the snout and throws off chain alignment. Shimming it with a washer is the simple fix, and 18-8 stainless will not rust into place or gall against the hub the way plain steel can.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 18-8 stainless steel\u003c\/li\u003e\n\u003cli\u003eOutside diameter: .75 in\u003c\/li\u003e\n\u003cli\u003eInside diameter: .35 in\u003c\/li\u003e\n\u003cli\u003eThickness: .035 - .065 in\u003c\/li\u003e\n\u003cli\u003eFits inside the clutch drive hub on the clutch bolt\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold individually as a washer only. Clutch bolt, drive hub and clutch assembly are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318419603644,"sku":"MCCWOD75","price":0.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_1f416ad6-b352-45a1-83ad-7b55a79f58b6.jpg?v=1787601961"},{"product_id":"titanium-clutch-drive-plate","title":"Titanium Clutch Drive Plate","description":"\u003cp\u003eTitanium clutch drive plate that mates to our titanium clutch drive hub using our tapered drive hub bolts. It is a direct replacement for the drive plate in Bully style clutches on outlaw kart, junior sprint, quarter midget and micro sprint karts.\u003c\/p\u003e\u003cp\u003eThe drive plate carries every bit of torque the frictions put into the hub, so it takes a beating and it spins the whole time the engine is running. Titanium lets it stay stiff enough to handle that load at 66 g, and it will not surface-rust or gall against the hub between race weekends the way a steel plate does.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: titanium\u003c\/li\u003e\n\u003cli\u003eWeight: 66 g\u003c\/li\u003e\n\u003cli\u003eMates to our titanium clutch drive hub\u003c\/li\u003e\n\u003cli\u003eMounts with our tapered #10-32 countersunk drive hub bolts\u003c\/li\u003e\n\u003cli\u003eFits Bully style clutches\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold as a drive plate only. Drive hub, tapered drive hub bolts and clutch assembly are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318419833020,"sku":"FTTCDP01","price":72.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_f8e92312-6d22-4905-88fb-75b32de637e6.jpg?v=1787601978"},{"product_id":"revolver-hubs-5-16-24-left-front-non-stepped-right-front","title":"Revolver Hubs - 5\/16-24 Left Front\/Non-Stepped Right Front","description":"\u003cp\u003eThis is our non-brake 5\/16 stud left front hub for outlaw karts and go karts. It runs two 5\/8 inch ID small bearings for non-stepped spindles, and if your kart has a non-stepped right front you can run this same hub on that corner too.\u003c\/p\u003e\u003cp\u003eThe recessed pocket lets the stud sit flush into the backside of the hub, so you get that press-in look without the press-in problems. Machined from 6061 aluminum, it cuts rotating weight off the front end so the kart turns in and picks up quicker - and it looks good doing it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStud size: 5\/16\u003c\/li\u003e\n\u003cli\u003eMaterial: 6061 aluminum\u003c\/li\u003e\n\u003cli\u003eBearings: two 5\/8 inch ID small bearings, included\u003c\/li\u003e\n\u003cli\u003eFor non-stepped spindles - works as a left front or a non-stepped right front\u003c\/li\u003e\n\u003cli\u003eRecessed pockets for flush mount studs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStuds, nuts and dust covers are sold separately. This hub uses two of our left front style dust covers.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318419898556,"sku":"FTRHLFSS-516","price":41.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_f5389e95-c537-4988-94da-b038456685bd.jpg?v=1787601982"},{"product_id":"revolver-hub-front-bearings","title":"Revolver Hub - Front Bearings","description":"\u003cp\u003eReplacement front bearings for Revolver front hubs on outlaw karts and go karts. Three sizes cover the whole Revolver front hub range, so you can rebuild a left front, a right front, or a big bell right front without hunting through a bearing catalog.\u003c\/p\u003e\u003cp\u003eFront bearings take a beating: side load in the corners, heat coming off the brake, and track dirt working past the dust cover all wear them out over a season. A dragging or notchy front bearing is free speed left on the table, and a seized one can end a night, so it is worth keeping fresh spares in the trailer.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTapered bearing and race, for the inside of a right front hub. Inside diameter 0.75 in\u003c\/li\u003e\n\u003cli\u003eSealed small bearing, for a left front hub or the outside of any right front hub. Inside diameter 0.625 in, outside diameter 1.375 in\u003c\/li\u003e\n\u003cli\u003eSealed large bearing, for the inside of sealed right front hubs. Inside diameter 0.75 in, outside diameter 1.625 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold individually, so check how many your hub takes before ordering. The tapered option includes the matching race. Bearing spacers and dust covers are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Small","offer_id":47318419931324,"sku":"FTRFHBSS","price":2.99,"currency_code":"USD","in_stock":true},{"title":"Large","offer_id":47318419964092,"sku":"FTRFHBSL","price":3.89,"currency_code":"USD","in_stock":true},{"title":"Tapered","offer_id":47318419996860,"sku":"FTRFHBTL","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_e10f47db-b846-41a3-8537-bdc1abc5b04e.jpg?v=1787601984"},{"product_id":"steel-clutch-thrust-bearing","title":"Steel Clutch Thrust Bearing","description":"\u003cp\u003eCarbon steel thrust bearing for bully style go kart clutches on outlaw karts, junior sprints and clone\/Predator engines. This is the same thrust bearing we build into our own clutches, so it drops straight into a stock or upgraded pack.\u003c\/p\u003e\u003cp\u003eThe thrust bearing is what lets the clutch spin free instead of dragging when it is out of engagement, and it takes a beating from the RPM and the heat soaking out of the drum. Carbon steel handles both without flattening out or galling, and replacing a tired one is the cheapest way to get a notchy clutch spinning smoothly again.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: carbon steel\u003c\/li\u003e\n\u003cli\u003eInside diameter: .875 in.\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 1.425 in.\u003c\/li\u003e\n\u003cli\u003eWeight: 5.4 g\u003c\/li\u003e\n\u003cli\u003eFits: bully style clutches\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold individually. Thrust washers and bearing races are sold separately — check your shim stack when you replace the bearing.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318420029628,"sku":"FTCSCTB1","price":3.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_fa9be238-fd3b-40e0-85fa-744b5a9959aa.jpg?v=1787601986"},{"product_id":"clutch-rebuild-kit","title":"Clutch Rebuild Kit","description":"\u003cp\u003eA complete wear-parts rebuild kit for Bully style go kart racing clutches, sized for single, two and three disk packs on outlaw kart, junior sprint, quarter midget and micro sprint karts. Everything that wears out in a season is in one box.\u003c\/p\u003e\u003cp\u003eYour clutch should be checked every run, or at minimum every race. Watch that the air gap is maintained, that the frictions are not worn past spec, and that no dirt has packed in around the lever pivots. Check spring heights too, since a retainer that backs off quietly changes your engagement RPM. Worn frictions, excessive air gap, or inconsistent engagement RPM all mean it is time to rebuild.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e#10-32 titanium lever plate bolts\u003c\/li\u003e\n\u003cli\u003eFriction discs\u003c\/li\u003e\n\u003cli\u003eFloaters: 1 floater in the two disk kit, 2 floaters in the three disk kit\u003c\/li\u003e\n\u003cli\u003eStainless steel bearing race\u003c\/li\u003e\n\u003cli\u003eAvailable for single disk, two disk and three disk clutches\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSelect the kit that matches your clutch configuration. Springs, lever pins, drive hub, pressure plate and basket are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Single Disk","offer_id":47318420095164,"sku":"FTTCRBK1","price":48.35,"currency_code":"USD","in_stock":true},{"title":"Two Disk","offer_id":47318420127932,"sku":"FTTCRBK2","price":119.63,"currency_code":"USD","in_stock":true},{"title":"Three Disk","offer_id":47318420160700,"sku":"FTTCRBK3","price":185.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_ca02a145-4f1f-4dd7-a400-34ce93a2b155.jpg?v=1787601998"},{"product_id":"standard-hubs-1-4-28-right-front-sealed-bearing","title":"Standard Hubs - 1\/4-28 Right Front Sealed Bearing","description":"\u003cp\u003eFor when you are balling on a budget, or just kicking it old school. This 1\/4-28 right front sealed bearing hub is a cost effective alternative to our Revolver Hubs for outlaw karts, junior sprints and go karts, and it keeps the same recessed stud design.\u003c\/p\u003e\u003cp\u003eThe hub is fully machined, never poured or extruded, so the material is consistent all the way through and the bearing bores stay true. Recessed pockets let flush head studs sit even with the back of the hub. Machined 6061 aluminum keeps rotating weight down and resists corrosion through a full season of heat cycles.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStud size: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eMaterial: 6061 aluminum, fully machined\u003c\/li\u003e\n\u003cli\u003eBearings: sealed straight bearings included, stepped 5\/8 and 3\/4 inch ID\u003c\/li\u003e\n\u003cli\u003eRecessed pockets for flush mount studs\u003c\/li\u003e\n\u003cli\u003eWeight bare (no studs, bearings, spacers or races): 139 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStuds, nuts and dust covers are sold separately. This hub uses one right front and one left front style dust cover. Titanium studs are NOT recommended for use on syrup tracks indoors.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318420193468,"sku":"FTSHFSS","price":32.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/Standard_1_4_inch_go_kart_hub.jpg?v=1787602001"},{"product_id":"stainless-clutch-bearing-race","title":"Stainless Clutch Bearing Race","description":"\u003cp\u003eStainless bearing race for bully style go kart clutches on outlaw karts, junior sprints and clone\/Predator engines. It is a direct replacement for the steel race in a standard clutch, and it is the race our own titanium clutch kits run inside the clutch basket rather than attached to the drive hub.\u003c\/p\u003e\u003cp\u003eStainless means the race will not rust in storage or after a wash-down, and a clean, true race is what keeps the clutch spinning free and the bearing loaded evenly. Racers running a full stable of clutches or a kart shop building clutches will want the 35 pack.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: stainless steel\u003c\/li\u003e\n\u003cli\u003eLength: 1.15 in.\u003c\/li\u003e\n\u003cli\u003eOutside diameter: .87 in.\u003c\/li\u003e\n\u003cli\u003eInside diameter: .75 in.\u003c\/li\u003e\n\u003cli\u003eFlange: .99 in.\u003c\/li\u003e\n\u003cli\u003eIncludes C-ring groove\u003c\/li\u003e\n\u003cli\u003eWeight: 24 g\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the standard steel clutch race\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable individually or in a pack of 35. Bearing, thrust washers and snap ring are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"1","offer_id":47318420226236,"sku":"FTSCBR01","price":7.86,"currency_code":"USD","in_stock":true},{"title":"35","offer_id":47318420259004,"sku":"FTSCBR35","price":186.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/20250117-115205.jpg?v=1787602010"},{"product_id":"revolver-hub-front-bearing-spacer","title":"Revolver Hub - Front Bearing Spacer","description":"\u003cp\u003eAluminum front bearing spacer that sits inside a Revolver front hub, between the two bearings, on outlaw karts and go karts. Every new Revolver front hub ships with the correct spacer already, so this listing is for replacements and spares, and these are the same spacers that come with our front hubs.\u003c\/p\u003e\u003cp\u003eThe spacer is what stops the spindle nut from pulling the two bearings toward each other when you tighten it down. Over-tighten a hub without one and the bearings bind, the wheel drags, and the front end feels tight in a way no amount of chassis adjustment will fix. Aluminum keeps the added weight down at the same time.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: aluminum\u003c\/li\u003e\n\u003cli\u003eFits inside Revolver front hubs, between the bearings\u003c\/li\u003e\n\u003cli\u003eLeft front old style: just under 1 in, ridged\u003c\/li\u003e\n\u003cli\u003eLeft front new short style: just under 3\/4 in, smooth\u003c\/li\u003e\n\u003cli\u003eAlso available for left front stepped hubs and the left front brake hub\u003c\/li\u003e\n\u003cli\u003eRight front versions for tapered bearing and straight sealed bearing hubs\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePick the option that matches your hub, since the left front and right front spacers are not interchangeable. Bearings, dust covers and studs are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"LF - Old Style","offer_id":47318420291772,"sku":"FTARHLFO","price":1.24,"currency_code":"USD","in_stock":true},{"title":"LF - NEW Short Style","offer_id":47318420324540,"sku":"FTARFHLFN","price":1.24,"currency_code":"USD","in_stock":true},{"title":"LF - Stepped","offer_id":47318420357308,"sku":"FTARHLFS","price":1.24,"currency_code":"USD","in_stock":true},{"title":"LF - Brake Hub","offer_id":47318420390076,"sku":"FTARHBHS","price":1.24,"currency_code":"USD","in_stock":true},{"title":"RF Tapered","offer_id":47318420422844,"sku":"FTRHRFST","price":1.24,"currency_code":"USD","in_stock":true},{"title":"RF Sealed","offer_id":47318420455612,"sku":"FTRHRFSS","price":1.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_d7dee817-3073-4b70-bfc0-f589802ee65b.jpg?v=1787602020"},{"product_id":"superfinished-tapered-roller-bearing","title":"Superfinished Tapered Roller Bearing","description":"\u003cp\u003eBetter life, less drag, more speed. This superfinished tapered roller bearing and race set is a direct replacement for the standard tapered bearings and races used in our tapered front hubs on outlaw karts, junior sprints and go karts.\u003c\/p\u003e\u003cp\u003eThese bearings have been micropolished using an isotropic superfinishing process. Machining imperfections are honed down, reducing surface roughness on a microscopic level so your lubricant can actually do its job. When the lubrication works, friction and therefore heat drop - and less heat means less wear and a longer service life.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner diameter: 3\/4 inch\u003c\/li\u003e\n\u003cli\u003eIsotropic superfinished (micropolished) rolling surfaces\u003c\/li\u003e\n\u003cli\u003eBearing and race come as a set\u003c\/li\u003e\n\u003cli\u003eBearings are not pre-lubricated\u003c\/li\u003e\n\u003cli\u003eDirect replacement for our standard tapered front hub bearings and races\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhen using superfinished bearings you must replace the bearing race as well. If you cannot tap the old bearing race out, we suggest carefully running a bead of weld around the center of the race, then tapping the hub on a bench - the race should shrink and move.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318420488380,"sku":"FTRFHBSF","price":20.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_672f3705-1da2-4090-b5a9-0c44bfcf7b19.jpg?v=1787602021"},{"product_id":"clutch-springs","title":"Clutch Springs","description":"\u003cp\u003eReplacement clutch springs for Bully style go kart racing clutches used in outlaw kart, junior sprint, quarter midget and micro sprint classes. Three rates let you set engagement RPM without changing lever weights or frictions.\u003c\/p\u003e\u003cp\u003eSpring rate is the main lever you have over where the clutch hooks up, and springs take a set over time, so a pack that engaged perfectly in the spring will creep by mid-season. Our red and black springs match the rates other companies offer, so you can swap straight across. The orange spring is all new, designed for setups running no lever weights or for anyone chasing a very low engagement point.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRed: .090 rate\u003c\/li\u003e\n\u003cli\u003eBlack: .085 rate\u003c\/li\u003e\n\u003cli\u003eOrange: .070 rate, for low engagement or no-lever-weight setups\u003c\/li\u003e\n\u003cli\u003eFits Bully style racing clutches\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note: spring heights may need to be set higher to reach the same engagement RPM, especially with the black springs. Sold individually. Retainers, lever weights and clutch assembly are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Red .090","offer_id":47318420521148,"sku":"FTSCSRED","price":3.0,"currency_code":"USD","in_stock":true},{"title":"Black .085","offer_id":47318420553916,"sku":"FTSCSBLK","price":3.0,"currency_code":"USD","in_stock":true},{"title":"Orange .070","offer_id":47318420586684,"sku":"FTSCSORG","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_adf99859-a770-47b5-84c1-852598d11406.jpg?v=1787602022"},{"product_id":"titanium-go-kart-clutch-bolt-kit","title":"Titanium Go Kart Clutch Bolt Kit","description":"\u003cp\u003eTitanium clutch bolt kit for bully style clutches on outlaw karts, junior sprints and clone\/Predator go kart engines. It is everything you need to bolt the clutch to the crankshaft: our titanium bolt plus the lock washer and flat washer that go with it.\u003c\/p\u003e\u003cp\u003eThe bolt is drilled through the head, has machined flats and a hole down the center, so every gram that does not do any work has been taken out of it. That matters here because this bolt sits right on the crank centerline and spins with the engine, and titanium will not rust into place the way a steel clutch bolt does after a season of heat cycles.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: titanium bolt\u003c\/li\u003e\n\u003cli\u003eBolt length: 3\/4 in.\u003c\/li\u003e\n\u003cli\u003eHead: drilled, with machined flats and a center hole\u003c\/li\u003e\n\u003cli\u003eTorque spec: 23 ft-lbs\u003c\/li\u003e\n\u003cli\u003eKit weight: 9.4 g\u003c\/li\u003e\n\u003cli\u003eIncludes: titanium bolt, lock washer, flat washer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFits bully style clutches. Torque to 23 ft-lbs on assembly. Sold as a complete kit.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318420914364,"sku":"FTTCBK01","price":11.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_2c529f30-72bf-487e-911a-592feaef6b1d.jpg?v=1787602037"},{"product_id":"titanium-clutch-pressure-plate","title":"Titanium Clutch Pressure Plate","description":"\u003cp\u003eTitanium clutch pressure plate built to match our titanium drive hub and floaters. It fits our one, two and three disk Bully style clutches for outlaw kart, junior sprint, quarter midget and micro sprint racing, and is the same plate supplied in our clutch upgrade kit.\u003c\/p\u003e\u003cp\u003eThe pressure plate is what the levers push on every time the clutch engages, so it lives in the hottest, most heavily loaded part of the pack. Titanium holds that load at 71 g and does not warp or discolor under repeated heat cycles the way a lighter aluminum plate can.\u003c\/p\u003e\u003cp\u003eThe plate is no longer welded. We now bond the studs with a heat-resistant adhesive, which keeps them from working loose and holds them perfectly straight, so the pack stacks square every time you rebuild it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: titanium\u003c\/li\u003e\n\u003cli\u003eWeight: 71 g\u003c\/li\u003e\n\u003cli\u003eFits one, two and three disk clutches\u003c\/li\u003e\n\u003cli\u003eMatches our titanium drive hub and floaters\u003c\/li\u003e\n\u003cli\u003eStuds bonded with heat-resistant adhesive rather than welded\u003c\/li\u003e\n\u003cli\u003eSame plate included in our clutch upgrade kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold as a pressure plate only. Drive hub, floaters, frictions and clutch assembly are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318420947132,"sku":"FTTCPP01","price":118.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_828daa1c-5942-41a6-981a-a71ebe8afbcc.jpg?v=1787602039"},{"product_id":"titanium-go-kart-king-pin","title":"Titanium Go Kart King Pin","description":"\u003cp\u003eDesigned like no other king pin on the market. This titanium go kart king pin carries the spindle on outlaw karts, junior sprints and go karts, and it is made from grade 5 6AL-4V titanium for the strength to take corner loads and curb hits without bending.\u003c\/p\u003e\u003cp\u003eThe head is cut down for more ground clearance, and the pin is center drilled to lose even more weight. Titanium also shrugs off the rust and galling that seize a steel king pin in the spindle after a wet weekend.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: grade 5 6AL-4V titanium\u003c\/li\u003e\n\u003cli\u003eLengths: 3.75 inch and 4 inch (working length measured from under the head to the end of the threads)\u003c\/li\u003e\n\u003cli\u003eDiameter: just below .5 inch for a smooth but tight fit on most types of karts\u003c\/li\u003e\n\u003cli\u003eCut-down head for added ground clearance\u003c\/li\u003e\n\u003cli\u003eCenter drilled to reduce weight\u003c\/li\u003e\n\u003cli\u003eLength and cotter pin hole placement adjusted for correct castle nut and pin spacing\u003c\/li\u003e\n\u003cli\u003eWeight: 48 grams\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePrice is per piece. Castle nut, cotter pin and spindle hardware sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"3.75 inch","offer_id":47318421209276,"sku":"FTTKP375","price":21.12,"currency_code":"USD","in_stock":true},{"title":"4 Inch","offer_id":47318421242044,"sku":"FTTKP400","price":21.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/IMG_5842.jpg?v=1787602061"},{"product_id":"titanium-clutch-drive-hub-and-plate","title":"Titanium Clutch Drive Hub and Plate","description":"\u003cp\u003eOur titanium clutch drive hub and pressure plate, supplied already assembled. Designed for Bully style clutches on outlaw kart, junior sprint, quarter midget and micro sprint karts, it is the direct replacement for the drive hub and plate included in our clutch upgrade kit.\u003c\/p\u003e\u003cp\u003eThe drive hub is the backbone of the clutch: it carries the frictions, locates the levers and takes every bit of torque on its way to the shaft. Building it in titanium takes real rotating weight off the crank while keeping the stiffness the pack needs to engage consistently, and titanium will not corrode or gall against the bolts through a full season of heat cycles.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: titanium\u003c\/li\u003e\n\u003cli\u003eSupplied assembled: drive hub plus pressure plate\u003c\/li\u003e\n\u003cli\u003eOne Disk: 117 g\u003c\/li\u003e\n\u003cli\u003eTwo Disk: 135 g\u003c\/li\u003e\n\u003cli\u003eThree Disk: 151 g\u003c\/li\u003e\n\u003cli\u003eFits Bully style clutches\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSelect the size that matches your clutch configuration. Frictions, floaters, levers, springs, lever plate and basket are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"One Disk","offer_id":47318421274812,"sku":"FTTCDHC1","price":260.85,"currency_code":"USD","in_stock":true},{"title":"Two Disk","offer_id":47318421307580,"sku":"FTTCDHC2","price":268.92,"currency_code":"USD","in_stock":true},{"title":"Three Disk","offer_id":47318421340348,"sku":"FTTCDHC3","price":276.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_d8a5c0df-c86b-4850-ba67-7935897fd065.jpg?v=1787602062"},{"product_id":"titanium-go-kart-clutch-key","title":"Titanium Go Kart Clutch Key","description":"\u003cp\u003eTitanium clutch key for a 3\/4 in. crankshaft, for bully style clutches on outlaw karts, junior sprints and clone\/Predator go kart engines. It replaces the steel key that locks the clutch to the crank.\u003c\/p\u003e\u003cp\u003eCutting rotating weight is where lap time hides, and this is an easy place to take a little more out. Grade 5 titanium is strong enough to carry the drive load while weighing well under the steel key it replaces, and it will not rust into the keyway over a season of heat cycles and wash-downs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: grade 5 titanium\u003c\/li\u003e\n\u003cli\u003eFits: 3\/4 in. crankshaft\u003c\/li\u003e\n\u003cli\u003eKeyway width: .185 in.\u003c\/li\u003e\n\u003cli\u003eKeyway height: .1410 in.\u003c\/li\u003e\n\u003cli\u003eLength: .9650 in.\u003c\/li\u003e\n\u003cli\u003eWeight: 1.8 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDepending on your clutch application the key may need to be cut shorter on install. Sold individually.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318421373116,"sku":"FTKEYBS1","price":5.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/20250115-141438.jpg?v=1787602067"},{"product_id":"revolver-hubs-1-4-28-right-front-big-bell-tapered-bearing","title":"Revolver Hubs - 1\/4-28 Right Front Big Bell Tapered Bearing","description":"\u003cp\u003eThe Revolver Big Bell right front hub with tapered bearings is built for outlaw karts and go karts that load the right front hard. The larger bell increases the contact patch between the hub and the back of the wheel, which cuts the flex between the two under heavy side load.\u003c\/p\u003e\u003cp\u003eIf you have ever pulled a right front wheel and found the imprint of the hub pressed into the back of it, that is the flex this hub is designed to solve. Spreading the load over a bigger face keeps the wheel flat on the hub instead of working against three studs.\u003c\/p\u003e\u003cp\u003eThis version runs tapered bearings (angular contact), which are happiest carrying side load rather than pure radial load, exactly what a right front sees in the corner. Customers have also reported that switching to tapered bearings reduced vibration in the front end. Machined from 7075 aluminum, it cuts rotating weight and looks good doing it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 7075 aluminum\u003c\/li\u003e\n\u003cli\u003eStud thread: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eBearings: tapered, angular contact, stepped 5\/8 in and 3\/4 in, included\u003c\/li\u003e\n\u003cli\u003eBig Bell design for a larger wheel contact patch and less flex\u003c\/li\u003e\n\u003cli\u003eWeight, bare hub with no studs, bearings, spacers or races: 162 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAluminum front dust covers, studs and nuts are sold separately. This hub uses one right front tapered dust cover and one left front \/ right front outer dust cover. Please note: titanium studs are NOT recommended for use on syrup tracks indoors.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318421405884,"sku":"FTRHBBTS","price":63.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_c779541f-2bbf-4771-a218-5ea962f22e82.jpg?v=1787602071"},{"product_id":"titanium-clutch-lever-pins","title":"Titanium Clutch Lever Pins","description":"\u003cp\u003eTitanium clutch lever pins for our racing clutches and other four or six spring Bully style clutches used in outlaw kart, junior sprint, quarter midget and micro sprint karts. Sold in packs of six or eight.\u003c\/p\u003e\u003cp\u003eLever pins are a wear item that nobody thinks about until a lever hangs up. They pivot under load every time the clutch engages, and dirt packed around a worn pin is one of the most common causes of inconsistent engagement RPM. Titanium keeps them at 1.2 g each and resists the galling and corrosion that seizes steel pins in the lever plate pockets.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: titanium\u003c\/li\u003e\n\u003cli\u003eWeight: 1.2 g per pin\u003c\/li\u003e\n\u003cli\u003eFits four and six spring clutches\u003c\/li\u003e\n\u003cli\u003eAvailable in packs of 6 or 8\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold as pins only. Levers, lever plate, springs and clutch assembly are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"6","offer_id":47318421504188,"sku":"FTTCLP06","price":8.26,"currency_code":"USD","in_stock":true},{"title":"8","offer_id":47318421536956,"sku":"FTTCLP08","price":11.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_d09d3b2a-4021-4836-ab0b-d5846050c858.jpg?v=1787602079"},{"product_id":"revolver-hubs-1-4-28-right-front-tapered-bearing","title":"Revolver Hubs - 1\/4-28 Right Front Tapered Bearing","description":"\u003cp\u003eThe Revolver 1\/4-28 right front hub with tapered bearings is the standard-bell right front for outlaw karts and go karts, machined from 7075 aluminum. It runs tapered (angular contact) bearings, which are built to carry side load rather than just radial load, and the right front is where that side load lives.\u003c\/p\u003e\u003cp\u003eTapered bearings hold up better in the corner when the kart is leaning on the right front, and several customers have reported that switching to tapered bearings reduced vibration in the front end compared to straight sealed ball bearings.\u003c\/p\u003e\u003cp\u003eRotating weight at the end of the spindle costs you acceleration and slows down how quickly the front end reacts, so 7075 aluminum keeps this hub strong while staying light. The machined Revolver profile means you cut that weight and still look good doing it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 7075 aluminum\u003c\/li\u003e\n\u003cli\u003eStud thread: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eBearings: tapered, angular contact, stepped 5\/8 in and 3\/4 in, included\u003c\/li\u003e\n\u003cli\u003eWeight, bare hub with no studs, bearings, spacers or races: 120 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStuds, nuts and dust covers are sold separately. This hub uses one right front tapered dust cover and one left front \/ right front outer dust cover. Please note: titanium studs are NOT recommended for use on syrup tracks indoors.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318421602492,"sku":"FTRHRFTS","price":57.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_0ada460f-04e8-4862-b279-6ac2aefccf58.jpg?v=1787602094"},{"product_id":"aluminum-go-kart-clutch-baskets","title":"Aluminum Go Kart Clutch Baskets","description":"\u003cp\u003eAluminum clutch basket made to fit bully style clutches and gears, for outlaw karts, junior sprints and clone\/Predator go kart engines. Available for one, two and three disk clutch packs, so you can match the basket to whatever build you are running.\u003c\/p\u003e\u003cp\u003eMachined from 6061 aluminum and black anodized. Aluminum takes real rotating weight off the end of the crank compared to a steel basket, and because the basket spins with the engine every gram off it shows up in how fast the motor picks up RPM. The anodizing keeps the finish on through repeated teardowns and wash-downs instead of coming off in your hands.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 6061 aluminum, black anodized\u003c\/li\u003e\n\u003cli\u003eFits: bully style clutches and gears\u003c\/li\u003e\n\u003cli\u003eOne disk basket: 97.4 g\u003c\/li\u003e\n\u003cli\u003eTwo disk basket: 97.6 g\u003c\/li\u003e\n\u003cli\u003eThree disk basket: 111.4 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eChoose one, two or three disk above. Custom logos can be etched into the product on orders of 10 or more only. Gear, snap ring and clutch internals are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"One Disk Basket","offer_id":47318421635260,"sku":"FTACB1D1","price":24.48,"currency_code":"USD","in_stock":true},{"title":"Two Disk Basket","offer_id":47318421668028,"sku":"FTACB2D1","price":38.24,"currency_code":"USD","in_stock":true},{"title":"Three Disk Basket","offer_id":47318421700796,"sku":"FTACB3D1","price":45.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_e1c99706-4f95-4b56-9c25-38fc7375251a.jpg?v=1787602096"},{"product_id":"10-32-countersunk-titanium-clutch-drive-hub-bolt","title":"#10-32 Countersunk Titanium Clutch Drive Hub Bolt","description":"\u003cp\u003eReplacement Grade 5 titanium bolt that mounts the drive plate to the clutch drive hub on Bully style racing clutches for outlaw kart, junior sprint, quarter midget and micro sprint karts. The tapered countersunk head sits flush in the plate and takes a 1\/8 in allen key.\u003c\/p\u003e\u003cp\u003eThese bolts clamp the plate to the hub through every engagement cycle, so they see constant shock loading and heat. Grade 5 titanium holds that clamp load at 1.2 g per bolt and will not corrode into the hub threads between race weekends.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Grade 5 titanium\u003c\/li\u003e\n\u003cli\u003eThread: #10-32\u003c\/li\u003e\n\u003cli\u003eHead: tapered countersunk, 1\/8 in allen drive\u003c\/li\u003e\n\u003cli\u003eWeight: single 1.2 g, four pack 4.6 g, seven pack 8 g\u003c\/li\u003e\n\u003cli\u003eSold individually, in packs of four for a one disk clutch, or packs of seven for two and three disk clutches\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNote: if you have to replace these bolts you will most likely need an extractor, or have to drill them out of the clutch hub. Drive plate, drive hub and clutch assembly are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Single","offer_id":47318421733564,"sku":"FTTCDHB1","price":2.95,"currency_code":"USD","in_stock":true},{"title":"Four","offer_id":47318421766332,"sku":"FTTCDHB4","price":11.8,"currency_code":"USD","in_stock":true},{"title":"Seven","offer_id":47318421799100,"sku":"FTTCDHB5","price":20.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_06544520-3f3a-4045-a049-09a1c514441f.jpg?v=1787602098"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/collections\/rn-image_picker_lib_temp_417de34e-d859-4bba-bbc3-fc19c4d11340.jpg?v=1787856497","url":"https:\/\/toigoracing.com\/collections\/five-three-titanium.oembed","provider":"Toigo Racing","version":"1.0","type":"link"}