{"title":"Five Three Ti – Lugs \u0026 Studs","description":"\u003cp\u003eFive Three Titanium lug nuts, wheel studs and Color Lab anodized titanium hardware.\u003c\/p\u003e","products":[{"product_id":"steel-1-4-28-lug-stud-flush-head","title":"Steel 1\/4-28 Lug Stud Flush Head","description":"\u003cp\u003eZinc-coated \u003cstrong\u003e1\/4-28 wheel stud\u003c\/strong\u003e with a bullet nose for fast, accurate tire changes on go karts, outlaw karts and quarter midgets. The lightweight flush head sits even with the back side of the hub, and an internal 1\/8\" hex broach lets you drive the stud without chewing up the head.\u003c\/p\u003e\u003cp\u003eThe colorful zinc finish gives it far better corrosion resistance than a bare stud, so it holds up season after season in wet and muddy conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eHead: lightweight flush \/ flat head\u003c\/li\u003e\n\u003cli\u003eDrive: internal 1\/8\" hex\u003c\/li\u003e\n\u003cli\u003eMaterial: zinc-coated carbon steel\u003c\/li\u003e\n\u003cli\u003eWeight: 7.6 g each\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA budget-friendly steel alternative to titanium studs, and the recommended choice for indoor syrup tracks where titanium studs are not advised. Sold individually. Lug nuts sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318416326844,"sku":"FTSRHLW1","price":1.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_5d709d3a-5f13-41b2-a851-4e75ce27ba79.jpg?v=1787601583"},{"product_id":"aluminum-1-2-20-flanged-lug-nuts-4-pack","title":"Aluminum 1\/2-20 Flanged Lug Nuts (4 Pack)","description":"\u003cp\u003eThese flanged aluminum lug nuts are built as a direct replacement for Three Quarter (TQ) midget lug nuts, and they run just as well in other applications that use a 1\/2-20 wheel stud. Sold as a set of four, so one pack covers a corner.\u003c\/p\u003e\u003cp\u003eThey are machined from 7075 aluminum, the high-strength aluminum alloy, so you get a big drop in rotating weight without giving up the clamp load a race wheel needs. Weight taken off at the wheel is weight the engine never has to spin back up off the corner, which is why aluminum lug nuts are one of the cheapest places to find speed.\u003c\/p\u003e\u003cp\u003eEach nut is anodized black to slow corrosion and keep a clean, finished look against the wheel face.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 7075 aluminum\u003c\/li\u003e\n\u003cli\u003eFinish: black anodized\u003c\/li\u003e\n\u003cli\u003eThread: 1\/2-20\u003c\/li\u003e\n\u003cli\u003eNut height: 1 in\u003c\/li\u003e\n\u003cli\u003eFlange: 1\/4 in tall, 0.97 in diameter\u003c\/li\u003e\n\u003cli\u003eWrench size: 3\/4 in\u003c\/li\u003e\n\u003cli\u003eWeight: 17 g per nut\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold as a 4 pack of nuts only; studs are sold separately. As with any aluminum fastener, torque them by hand rather than leaning on an impact, and check the threads for wear at regular intervals.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318426910908,"sku":"FTATQLNF","price":46.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_1a53a82a-634f-41bd-bbb5-7e4a0505d482.jpg?v=1787602436"},{"product_id":"steel-5-16-24-lug-nut","title":"Steel 5\/16-24 Lug Nut","description":"\u003cp\u003eA steel flanged, non-serrated lug nut sized for 5\/16-24 wheel studs. It is the everyday workhorse nut for go karts, quarter midgets and junior sprints, and it drops straight onto any 5\/16-24 stud.\u003c\/p\u003e\u003cp\u003eThe non-serrated flange face is deliberate: serrations bite into the wheel and add friction as you tighten, which throws off your torque reading and puts the extra load into the stud instead of into clamp. A smooth flange lets the nut pull down evenly, so the number on the torque wrench is the number the joint actually sees.\u003c\/p\u003e\u003cp\u003eEach nut carries a colorful zinc coating to hold off rust and corrosion through a season of trailer time, wash downs and wet nights at the track.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: steel\u003c\/li\u003e\n\u003cli\u003eFinish: colorful zinc coating\u003c\/li\u003e\n\u003cli\u003eThread: 5\/16-24\u003c\/li\u003e\n\u003cli\u003eStyle: flanged, non-serrated\u003c\/li\u003e\n\u003cli\u003eWeight: 6.4 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold by the piece, so order the count you need for a full set. Matching 5\/16-24 lug studs are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318427173052,"sku":"FTSN516F","price":1.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_0af4ee84-305f-48bf-a4aa-cee704246e02.jpg?v=1787602462"},{"product_id":"steel-5-16-24x1-25-lug-stud-flush-head","title":"Steel 5\/16-24x1.25 Lug Stud Flush Head","description":"\u003cp\u003eA 5\/16-24 x 1.25 wheel stud with a flush head, cut from steel and finished in colorful zinc. It suits quarter midgets, outlaw karts and oval karts running a 5\/16 stud, and it gives you the clean pressed-in appearance at the back of the hub without any of the headaches that come with an actual pressed-in stud.\u003c\/p\u003e\u003cp\u003ePressed studs spin, back out and wallow their bore once the hub gets hot and the wheel gets loaded. A threaded flush head stud carries the same low profile but stays where you put it, and when you do break one at the track you replace it with a wrench instead of a press.\u003c\/p\u003e\u003cp\u003eThe nose is turned to a rounded bullet shape so the wheel finds the stud on the first try during a hot change, and the head takes a 5\/32 internal allen drive.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: steel\u003c\/li\u003e\n\u003cli\u003eFinish: colorful zinc coating\u003c\/li\u003e\n\u003cli\u003eThread: 5\/16-24\u003c\/li\u003e\n\u003cli\u003eLength: 1.25 in\u003c\/li\u003e\n\u003cli\u003eHead: flush, 5\/32 internal allen drive\u003c\/li\u003e\n\u003cli\u003eNose: rounded bullet\u003c\/li\u003e\n\u003cli\u003eWeight: 12.6 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold by the piece, so order the quantity you need for the corner or the car. Matching 5\/16-24 lug nuts are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318427566268,"sku":"FTS516LW","price":1.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_389d4ac2-e678-44b5-a7e8-b1b5c7d206d2.jpg?v=1787602486"},{"product_id":"steel-1-4x28-lug-nut-7-16in-head","title":"Steel 1\/4x28 Lug Nut 7\/16in Head","description":"\u003cp\u003eA zinc plated steel 1\/4-28 non-serrated lug nut with a compact 7\/16 in head. It is most commonly run on go karts and quarter midgets, and it fits any application already using a 1\/4-28 wheel stud.\u003c\/p\u003e\u003cp\u003eThe smaller head is the point. A 7\/16 head carries a smaller flange than the standard 1\/2 in nut, and less flange face means less friction dragging against the wheel as you tighten. More of your torque turns into real clamp load instead of being burned off as friction, which is a large part of why studs snap in the first place.\u003c\/p\u003e\u003cp\u003eIt also saves weight where weight costs you most. At 5 g each this nut is 3 g lighter than the 1\/2 in head version, and that comes off the rotating mass at the outside of the wheel. Zinc plating keeps the rust off between race weekends.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: steel\u003c\/li\u003e\n\u003cli\u003eFinish: zinc plated\u003c\/li\u003e\n\u003cli\u003eThread: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eHead: 7\/16 in\u003c\/li\u003e\n\u003cli\u003eStyle: flanged, non-serrated\u003c\/li\u003e\n\u003cli\u003eTorque spec: 8 ft-lbs\u003c\/li\u003e\n\u003cli\u003eWeight: 5 g, compared with 8 g for the 1\/2 in head nut\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold by the piece, so order the count you need for a full set. Matching 1\/4-28 lug studs are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318427730108,"sku":"FTSLN1\/4-7\/16","price":1.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_174ef157-92e9-4bd6-a62b-adf4fff11655.jpg?v=1787602513"},{"product_id":"titanium-1-4-28-lug-nut-7-16in-head","title":"Titanium 1\/4-28 Lug Nut 7\/16in Head","description":"\u003cp\u003eLight and strong. A grade 5 titanium 1\/4-28 non-serrated lug nut with a compact 7\/16 in head, most commonly run on go karts and quarter midgets and suited to any application already turning a 1\/4-28 wheel stud.\u003c\/p\u003e\u003cp\u003eGrade 5 titanium is the reason to buy it: roughly half the density of steel with the strength to take everything a race wheel throws at a lug nut, and naturally corrosion resistant so it will not rust to the stud over a season. At 2.6 g each these cut nearly half the mass of the equivalent steel nut, and every gram comes off the rotating weight at the outer edge of the wheel where the engine feels it most on corner exit.\u003c\/p\u003e\u003cp\u003eThe smaller 7\/16 head also carries a smaller flange, so there is less friction between the nut and the wheel face while you tighten. More of the torque you apply becomes real clamp load rather than being lost to drag, which is one of the main reasons studs let go.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: grade 5 titanium\u003c\/li\u003e\n\u003cli\u003eThread: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eHead: 7\/16 in\u003c\/li\u003e\n\u003cli\u003eStyle: flanged, non-serrated\u003c\/li\u003e\n\u003cli\u003eTorque spec: 8 ft-lbs\u003c\/li\u003e\n\u003cli\u003eWeight: 2.6 g, compared with 4.8 g for the 1\/2 in head titanium nut\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold by the piece, so order the count you need for a full set. Matching 1\/4-28 lug studs are sold separately. Torque to 8 ft-lbs; do not run these up with an impact.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318427992252,"sku":"FTTLN1\/4-7\/16","price":4.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_83329590-34dd-490d-b132-bb47ac318671.jpg?v=1787602537"},{"product_id":"titanium-5-16-24x1-25-lug-stud-flush-head","title":"Titanium 5\/16-24x1.25 Lug Stud Flush Head","description":"\u003cp\u003eThe 5\/16-24 x 1.25 titanium wheel stud, now with a flush head like the 1\/4-28 studs. Built for quarter midgets, outlaw karts and oval karts running a 5\/16 stud, it gives you the clean pressed-in look at the back of the hub without any of the trouble a real pressed-in stud brings.\u003c\/p\u003e\u003cp\u003ePressed studs spin in the hub, back out and wallow their bore once heat and side load get into them. A threaded flush head stud sits just as low but stays put, and a broken one comes out with an allen key in the trailer instead of a press on the bench.\u003c\/p\u003e\u003cp\u003eTitanium is where the weight goes. At 7.2 g this stud is nearly 2 g lighter than the previous version and far lighter than steel, and it is unrolling that mass from the outer edge of the wheel where rotating weight costs the most. Titanium also shrugs off corrosion, so the stud will not seize into the hub over a season.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: titanium\u003c\/li\u003e\n\u003cli\u003eThread: 5\/16-24\u003c\/li\u003e\n\u003cli\u003eLength: 1.25 in\u003c\/li\u003e\n\u003cli\u003eHead: flush, 5\/32 internal allen drive\u003c\/li\u003e\n\u003cli\u003eNose: rounded bullet for quick wheel changes\u003c\/li\u003e\n\u003cli\u003eWeight: 7.2 g, nearly 2 g lighter than the previous design\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold by the piece, so order the quantity you need for the corner or the whole car. Matching 5\/16-24 lug nuts are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318428221628,"sku":"FTT516LW","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_9002e4fc-42f9-4471-b3fc-d692c79728de.jpg?v=1787602565"},{"product_id":"titanium-1-4-28-lug-stud-gear-bolt-external-hex-head","title":"Titanium 1\/4-28 Lug Stud\/Gear Bolt External Hex Head","description":"\u003cp\u003eThe original external hex design, back by popular demand. A 1\/4-28 x 1.50 titanium stud with a 1\/4 in external hex head, used as a lug stud and as a gear bolt, most commonly on go karts and quarter midgets.\u003c\/p\u003e\u003cp\u003eExtra light and extra strong is the whole point of a titanium fastener at the wheel. Titanium carries the load a lug stud sees at roughly half the density of steel, and it does it without rusting into the hub, so the stud you install in the spring is the stud that still comes out clean in the fall.\u003c\/p\u003e\u003cp\u003eThe external hex head lets you hold the stud with an open wrench from the back of the hub while you torque the nut on the front, which is faster than fighting an internal drive with the wheel in the way. The nose is turned to a bullet shape so the wheel and lug nut find the thread on the first try.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: titanium\u003c\/li\u003e\n\u003cli\u003eThread: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eLength: 1.50 in\u003c\/li\u003e\n\u003cli\u003eHead: 1\/4 in external hex\u003c\/li\u003e\n\u003cli\u003eNose: bullet shaped for easy wheel and lug nut installation\u003c\/li\u003e\n\u003cli\u003eWeight: 5.6 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePairs with our titanium lug nuts and with front or rear Revolver Hubs, all sold separately. A lighter version with an internal hex flush head is also available separately. Sold by the piece.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318429761724,"sku":"FTTRHOG1","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_844f04c1-9e0a-49ca-a04c-807d5937435e.jpg?v=1787602596"},{"product_id":"aluminum-1-4-28-lug-nut-1-2in-head","title":"Aluminum 1\/4-28 Lug Nut 1\/2in Head","description":"\u003cp\u003eA 1\/4-28 non-serrated flange lug nut with a 1\/2 in head, machined from 7075 aluminum for go karts, quarter midgets and anything else already running a 1\/4-28 wheel stud.\u003c\/p\u003e\u003cp\u003eYes, aluminum. This is the lightest lug nut in the range and it is aimed at racers who chase rotating weight and who are willing to maintain their hardware to get it. At 2.6 g each, a set drops the nuts on a hub from 24.2 g with steel, or 18 g with titanium, all the way down to 8.4 g. That is weight coming off the very outside of the rotating assembly, where the engine pays for it hardest every time you get back on the throttle.\u003c\/p\u003e\u003cp\u003eThe trade is thread life. Aluminum threads will strip if you abuse them. Do not run these on with an impact, and do not fit them at all unless you are going to double check that the threads are not pulling. Torque them to 4 to 6 ft-lbs with a wrench, inspect them regularly, and replace any nut that feels like it is wearing out.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 7075 aluminum\u003c\/li\u003e\n\u003cli\u003eThread: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eHead: 1\/2 in\u003c\/li\u003e\n\u003cli\u003eStyle: flanged, non-serrated\u003c\/li\u003e\n\u003cli\u003eTorque spec: 4 to 6 ft-lbs\u003c\/li\u003e\n\u003cli\u003eWeight: 2.6 g per nut\u003c\/li\u003e\n\u003cli\u003ePer hub: 8.4 g, versus 18 g in titanium and 24.2 g in steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold by the piece; studs are sold separately. These are a maintenance item, not a set and forget part. If you run an impact gun or you will not be checking threads between races, choose the titanium or steel lug nut instead.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318429958332,"sku":"FTARHLN1","price":2.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/1_4-28_Aluminum_Nut_Top.jpg?v=1787602623"},{"product_id":"steel-1-4x28-lug-nut-1-2in-head","title":"Steel 1\/4x28 Lug Nut 1\/2in Head","description":"\u003cp\u003eThe standard steel 1\/4-28 non-serrated flange nut with a 1\/2 in head. This is the everyday replacement lug nut on go karts and quarter midgets, and it fits any hub already running 1\/4-28 wheel studs.\u003c\/p\u003e\u003cp\u003eThe flange face is smooth rather than serrated on purpose. Serrations dig into the wheel and add friction as the nut comes down, which corrupts your torque reading and pushes the extra load into the stud instead of into clamp. A plain flange lets the nut seat evenly so 8 ft-lbs on the wrench is 8 ft-lbs at the joint.\u003c\/p\u003e\u003cp\u003eZinc plating keeps rust off the threads through wash downs, wet nights and long stretches in the trailer, so the nut still spins free when you need a fast wheel change.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: steel\u003c\/li\u003e\n\u003cli\u003eFinish: zinc plated\u003c\/li\u003e\n\u003cli\u003eThread: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eHead: 1\/2 in\u003c\/li\u003e\n\u003cli\u003eStyle: flanged, non-serrated\u003c\/li\u003e\n\u003cli\u003eTorque spec: 8 ft-lbs\u003c\/li\u003e\n\u003cli\u003eWeight: 8 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold by the piece, so order enough for a full set plus spares. Studs are sold separately. If you are chasing rotating weight, the same nut is offered in a 7\/16 in head, in titanium and in aluminum.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318430253244,"sku":"FTSLN1\/4-1\/2","price":1.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/20250204-135317.jpg?v=1787602646"},{"product_id":"titanium-5-16-24-lug-nut","title":"Titanium 5\/16-24 Lug Nut","description":"\u003cp\u003eA lightweight flanged, non-serrated lug nut in grade 5 titanium, sized for 5\/16-24 wheel studs. It is a straight upgrade for go karts, quarter midgets and junior sprints already running a 5\/16-24 stud.\u003c\/p\u003e\u003cp\u003eGrade 5 is the aerospace titanium alloy, and it is what lets this nut hold up to the shock loading, heat and side bite a race wheel puts through a lug nut while carrying roughly half the mass of the steel equivalent. Every gram saved here comes off the rotating weight at the outermost part of the wheel, which is the most expensive weight on the car to accelerate.\u003c\/p\u003e\u003cp\u003eTitanium also does not rust, so the nut does not seize onto the stud over a season of wash downs and wet nights, and a stuck lug nut never costs you a heat race.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: grade 5 titanium\u003c\/li\u003e\n\u003cli\u003eThread: 5\/16-24\u003c\/li\u003e\n\u003cli\u003eStyle: flanged, non-serrated\u003c\/li\u003e\n\u003cli\u003eTorque spec: 18 ft-lbs\u003c\/li\u003e\n\u003cli\u003eWeight: 4.7 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold by the piece, so order the count you need for a full set. Matching 5\/16-24 lug studs are sold separately. Torque to 18 ft-lbs with a wrench rather than running them up with an impact.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318430482620,"sku":"FTTN516F","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_f0120eb2-f70a-46b3-9291-f624101cc329.jpg?v=1787602668"},{"product_id":"titanium-1-4-28-lug-nut-1-2in-head","title":"Titanium 1\/4-28 Lug Nut 1\/2in Head","description":"\u003cp\u003eLight and strong. A grade 5 titanium 1\/4-28 non-serrated lug nut with the standard 1\/2 in head, most commonly run on go karts and quarter midgets but at home on any hub already turning 1\/4-28 wheel studs.\u003c\/p\u003e\u003cp\u003eThis is the direct swap for the steel 1\/2 in head nut, same wrench, same torque spec, roughly 40 percent less weight. At 4.8 g each the savings land on the outer edge of the rotating assembly, so the engine spends less of itself spinning the wheels back up every time you get out of a corner.\u003c\/p\u003e\u003cp\u003eGrade 5 titanium brings the strength to survive the shock loading a lug nut sees, plus natural corrosion resistance, so the nut backs off cleanly at the end of the year instead of galling onto a rusty stud.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: grade 5 titanium\u003c\/li\u003e\n\u003cli\u003eThread: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eHead: 1\/2 in\u003c\/li\u003e\n\u003cli\u003eStyle: flanged, non-serrated\u003c\/li\u003e\n\u003cli\u003eTorque spec: 8 ft-lbs\u003c\/li\u003e\n\u003cli\u003eWeight: 4.8 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold by the piece, so order the count you need for a full set. Studs are sold separately. If you want to take out more rotating weight, the same nut is offered with a lighter 7\/16 in head.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318430810300,"sku":"FTTLN1\/4-1\/2","price":4.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_40602b19-6d8e-4068-a35a-bd3926350a37.jpg?v=1787602692"},{"product_id":"color-lab-titanium-1-4-20x3-4-lock-collar-brake-hub-bolt","title":"Color Lab - Titanium 1\/4-20x3\/4 Lock Collar\/Brake Hub Bolt","description":"\u003cp\u003eTurn wrenches, turn heads. Color Lab brings race grade titanium hardware in bold, lab tuned anodized hues: ultra light, ultra strong, unmistakably yours. This is the 1\/4-20 x 3\/4 socket head lock collar bolt, the size used in other manufacturers' rear brake hubs on outlaw karts and junior sprints.\u003c\/p\u003e\u003cp\u003eEvery bolt is machined from lightweight grade 5 titanium, so you take real rotating and unsprung weight out of the rear end without giving up the strength a brake hub clamp needs. Titanium also handles the heat that lives around a rear brake and will not corrode into the collar over a season.\u003c\/p\u003e\u003cp\u003eThe heads are drilled for safety wire, so once the bolt is torqued you can wire it and stop worrying about it backing out mid main.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: grade 5 titanium\u003c\/li\u003e\n\u003cli\u003eThread: 1\/4-20\u003c\/li\u003e\n\u003cli\u003eLength: 3\/4 in\u003c\/li\u003e\n\u003cli\u003eHead: socket head, drilled for safety wire\u003c\/li\u003e\n\u003cli\u003eFinish: anodized, eight Color Lab colors\u003c\/li\u003e\n\u003cli\u003eWeight: 3.8 g, plus or minus 0.5 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note this is not the bolt used in our own brake hub; it is sized for other companies' rear brake hubs. Price is per bolt, so order the quantity your hub takes.\u003c\/p\u003e\u003cp\u003eColors, left to right in the first image: Go for Gold, Victory Violate, Royal Blue, Five Three Blue, Chartreuse, Pink Lemonade, Pearl, Oil Slick. 5\/16-18 bolts are shown in the photos.\u003c\/p\u003e\u003cp\u003eActual colors may vary slightly. Victory Violate and Royal Blue are close, though in person there is a slight shade difference in direct light. Pink Lemonade appears pink with light touches of yellow on the edges of the threads. The finish on both Pink Lemonade and Pearl may come out matte. Over time the anodizing may wear off the threads or off the head from wrench contact, so take care while installing to get the longest color life.\u003c\/p\u003e\u003cp\u003eAll colored hardware is made to order. Please allow 1-2 business days for processing.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Go for Gold","offer_id":47318431203516,"sku":"FTTLCBCG","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Victory Violate","offer_id":47318431236284,"sku":"FTTLCBCV","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Royal Blue","offer_id":47318431269052,"sku":"FTTLCBCB","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Five Three Blue","offer_id":47318431301820,"sku":"FTTLCBCL","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Chartreuse","offer_id":47318431334588,"sku":"FTTLCBCC","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Pink Lemonade","offer_id":47318431367356,"sku":"FTTLCBCP","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Pearl","offer_id":47318431400124,"sku":"FTTLCBCI","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Oil Slick","offer_id":47318431432892,"sku":"FTTLCBCO","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/color_lab_1_4_lock.jpg?v=1787602744"},{"product_id":"color-lab-titanium-1-4-28x3-4-lock-collar-brake-hub-bolt","title":"Color Lab - Titanium 1\/4-28x3\/4 Lock Collar\/Brake Hub Bolt","description":"\u003cp\u003eTurn wrenches, turn heads. Color Lab brings race grade titanium hardware in bold, lab tuned anodized hues: ultra light, ultra strong, unmistakably yours. This is the 1\/4-28 x 3\/4 socket head lock collar bolt used in our Revolver Rear Brake Hub on outlaw karts and junior sprints.\u003c\/p\u003e\u003cp\u003eEach bolt is machined from lightweight grade 5 titanium, which pulls real unsprung and rotating weight out of the rear end while still carrying the clamp load a brake hub demands. Titanium takes the heat that lives around a rear brake in stride and will not corrode into the collar over a long season.\u003c\/p\u003e\u003cp\u003eThe heads are drilled for safety wire, so once the bolts are torqued you can wire them and forget about them instead of chasing a loose brake hub in the pits.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: grade 5 titanium\u003c\/li\u003e\n\u003cli\u003eThread: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eLength: 3\/4 in\u003c\/li\u003e\n\u003cli\u003eHead: socket head, drilled for safety wire\u003c\/li\u003e\n\u003cli\u003eFinish: anodized, eight Color Lab colors\u003c\/li\u003e\n\u003cli\u003eWeight: 3.8 g, plus or minus 0.5 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePrice is per bolt, so order the quantity your hub takes. Revolver Rear Brake Hubs are sold separately.\u003c\/p\u003e\u003cp\u003eColors, left to right in the first image: Go for Gold, Victory Violate, Royal Blue, Five Three Blue, Chartreuse, Pink Lemonade, Pearl, Oil Slick. 5\/16-18 bolts are shown in the photos.\u003c\/p\u003e\u003cp\u003eActual colors may vary slightly. Victory Violate and Royal Blue are close, though in person there is a slight shade difference in direct light. Pink Lemonade appears pink with light touches of yellow on the edges of the threads. The finish on both Pink Lemonade and Pearl may come out matte. Over time the anodizing may wear off the threads or off the head from wrench contact, so take care while installing to get the longest color life.\u003c\/p\u003e\u003cp\u003eAll colored hardware is made to order. Please allow 1-2 business days for processing.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Go for Gold","offer_id":47318431465660,"sku":"FTTLCBFG","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Victory Violate","offer_id":47318431498428,"sku":"FTTLCBFV","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Royal Blue","offer_id":47318431531196,"sku":"FTTLCBFB","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Five Three Blue","offer_id":47318431563964,"sku":"FTTLCBFL","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Chartreuse","offer_id":47318431596732,"sku":"FTTLCBFC","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Pink Lemonade","offer_id":47318431629500,"sku":"FTTLCBFP","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Pearl","offer_id":47318431662268,"sku":"FTTLCBFI","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Oil Slick","offer_id":47318431695036,"sku":"FTTLCBFO","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/color_lab_1_4_lock_b1cf59b3-b1e2-4f4a-870b-6f64b6a10477.jpg?v=1787602786"},{"product_id":"color-lab-titanium-5-16-18x1-rear-hub-pinch-bolt","title":"Color Lab - Titanium 5\/16-18x1 Rear Hub Pinch Bolt","description":"\u003cp\u003eTurn wrenches, turn heads. Color Lab brings race grade titanium hardware in bold, lab tuned anodized hues: ultra light, ultra strong, unmistakably yours. This is the 5\/16-18 x 1 in socket head rear hub pinch bolt, the fastener that clamps a split rear hub onto the axle on outlaw karts and junior sprints.\u003c\/p\u003e\u003cp\u003eA pinch bolt lives a hard life. It has to hold clamp against the axle through every launch, every slide job and every curb hop, and it does it while sitting out in the dirt and the wash water. Grade 5 titanium gives you the strength for that at roughly half the density of steel, and it will not rust itself into the hub between seasons.\u003c\/p\u003e\u003cp\u003eThe heads are drilled for safety wire, so once you have set your clamp you can wire the bolt and stop thinking about it. These pair especially well with our Revolver Rear Hubs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: grade 5 titanium\u003c\/li\u003e\n\u003cli\u003eThread: 5\/16-18\u003c\/li\u003e\n\u003cli\u003eLength: 1 in\u003c\/li\u003e\n\u003cli\u003eHead: socket head, drilled for safety wire\u003c\/li\u003e\n\u003cli\u003eFinish: anodized, eight Color Lab colors\u003c\/li\u003e\n\u003cli\u003eWeight: 7.2 g, plus or minus 0.5 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePrice is per bolt, so order the count your hub takes. Revolver Rear Hubs are sold separately.\u003c\/p\u003e\u003cp\u003eColors, left to right in the first image: Go for Gold, Victory Violate, Royal Blue, Five Three Blue, Chartreuse, Pink Lemonade, Pearl, Oil Slick.\u003c\/p\u003e\u003cp\u003eActual colors may vary slightly. Victory Violate and Royal Blue are close, though in person there is a slight shade difference in direct light. Pink Lemonade appears pink with light touches of yellow on the edges of the threads. The finish on both Pink Lemonade and Pearl may come out matte. Over time the anodizing may wear off the threads or off the head from wrench contact, so take care while installing to get the longest color life.\u003c\/p\u003e\u003cp\u003eAll colored hardware is made to order. Please allow 1-2 business days for processing.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Go for Gold","offer_id":47318431760572,"sku":"FT516181G","price":6.25,"currency_code":"USD","in_stock":true},{"title":"Victory Violate","offer_id":47318431793340,"sku":"FT516181V","price":6.25,"currency_code":"USD","in_stock":true},{"title":"Royal Blue","offer_id":47318431826108,"sku":"FT516181B","price":6.25,"currency_code":"USD","in_stock":true},{"title":"Five Three Blue","offer_id":47318431858876,"sku":"FT516181L","price":6.25,"currency_code":"USD","in_stock":true},{"title":"Chartreuse","offer_id":47318431891644,"sku":"FT516181C","price":6.25,"currency_code":"USD","in_stock":true},{"title":"Pink Lemonade","offer_id":47318431924412,"sku":"FT516181P","price":6.25,"currency_code":"USD","in_stock":true},{"title":"Pearl","offer_id":47318431957180,"sku":"FT516181I","price":6.25,"currency_code":"USD","in_stock":true},{"title":"Oil Slick","offer_id":47318431989948,"sku":"FT516181O","price":6.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/color_lab_1_4_lock_c075a88e-2896-42e6-8010-36fe2a6e605b.jpg?v=1787602834"},{"product_id":"color-lab-titanium-1-4-28-lug-stud-external-hex-head","title":"Color Lab - Titanium 1\/4-28 Lug Stud External Hex Head","description":"\u003cp\u003eTurn wrenches, turn heads. Color Lab brings race grade titanium hardware in bold, lab tuned anodized hues: ultra light, ultra strong, unmistakably yours. This is the 1\/4-28 lug stud with an external hex head, built for quarter midgets, outlaw karts and oval karts.\u003c\/p\u003e\u003cp\u003eTitanium is the reason a wheel stud is worth upgrading. It carries the shock loading a lug stud takes at roughly half the density of steel, so you are pulling weight off the very outside of the rotating assembly, and it does not corrode into the hub over a season of wash downs and wet nights.\u003c\/p\u003e\u003cp\u003eThe external hex head lets you hold the stud with an open wrench from behind the hub while you torque the nut on the front, which is quicker than fighting an internal drive with a wheel in the way. The nose is turned to a rounded bullet shape so the wheel finds the thread on the first try during a hot change.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: titanium\u003c\/li\u003e\n\u003cli\u003eThread: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eHead: external hex\u003c\/li\u003e\n\u003cli\u003eNose: rounded bullet for quick wheel changes\u003c\/li\u003e\n\u003cli\u003eFinish: anodized, eight Color Lab colors\u003c\/li\u003e\n\u003cli\u003eWeight: 5.6 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold by the piece. The photos show the flush head version of the stud; this listing is the external hex head. The internal hex flush head stud is available separately, as are matching lug nuts.\u003c\/p\u003e\u003cp\u003eColors, left to right in the first image: Go for Gold, Victory Violate, Royal Blue, Five Three Blue, Chartreuse, Pink Lemonade, Pearl, Oil Slick.\u003c\/p\u003e\u003cp\u003eActual colors may vary slightly. Victory Violate and Royal Blue are close, though in person there is a slight shade difference in direct light. Pink Lemonade appears pink with light touches of yellow on the edges of the threads. The finish on both Pink Lemonade and Pearl may come out matte. Over time the anodizing may wear off the threads or off the head from wrench contact, so take care while installing to get the longest color life.\u003c\/p\u003e\u003cp\u003eAll colored hardware is made to order. Please allow 1-2 business days for processing.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Go for Gold","offer_id":47318432153788,"sku":"FTTRHOG1G","price":5.49,"currency_code":"USD","in_stock":true},{"title":"Victory Violate","offer_id":47318432186556,"sku":"FTTRHOG1V","price":5.49,"currency_code":"USD","in_stock":true},{"title":"Royal Blue","offer_id":47318432219324,"sku":"FTTRHOG1B","price":5.49,"currency_code":"USD","in_stock":true},{"title":"Five Three Blue","offer_id":47318432252092,"sku":"FTTRHOG1L","price":5.49,"currency_code":"USD","in_stock":true},{"title":"Chartreuse","offer_id":47318432284860,"sku":"FTTRHOG1C","price":5.49,"currency_code":"USD","in_stock":true},{"title":"Pink Lemonade","offer_id":47318432317628,"sku":"FTTRHOG1P","price":5.49,"currency_code":"USD","in_stock":true},{"title":"Pearl","offer_id":47318432350396,"sku":"FTTRHOG1I","price":5.49,"currency_code":"USD","in_stock":true},{"title":"Oil Slick","offer_id":47318432383164,"sku":"FTTRHOG1O","price":5.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_13d98c5f-19a8-4ec0-a131-ee0d545c25d7.jpg?v=1787602890"},{"product_id":"color-lab-titanium-1-4-28-lug-nut-7-16in-head","title":"Color Lab - Titanium 1\/4-28 Lug Nut 7\/16in Head","description":"\u003cp\u003eTurn wrenches, turn heads. Color Lab brings race grade titanium hardware in bold, lab tuned anodized hues: ultra light, ultra strong, unmistakably yours. This is the flanged, non-serrated 1\/4-28 lug nut with the lighter 7\/16 in head, sized for our 1\/4-28 lug studs on go karts and quarter midgets.\u003c\/p\u003e\u003cp\u003eMade from lightweight grade 5 titanium, these cut rotating weight at the outside edge of the wheel while still standing up to the loads racing throws at a lug nut. At 2.6 g apiece it is the lightest titanium nut in the line, and titanium does not rust, so it will not seize onto the stud partway through the year.\u003c\/p\u003e\u003cp\u003eThe smaller 7\/16 head also carries a smaller flange face, which means less friction against the wheel as you tighten and more of your torque turning into real clamp load.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: grade 5 titanium\u003c\/li\u003e\n\u003cli\u003eThread: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eHead: 7\/16 in\u003c\/li\u003e\n\u003cli\u003eStyle: flanged, non-serrated\u003c\/li\u003e\n\u003cli\u003eFinish: anodized, eight Color Lab colors\u003c\/li\u003e\n\u003cli\u003eTorque spec: 8 ft-lbs\u003c\/li\u003e\n\u003cli\u003eWeight: 2.6 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold by the piece, so order the count you need for a full set. Matching 1\/4-28 lug studs are sold separately. Torque to 8 ft-lbs with a wrench.\u003c\/p\u003e\u003cp\u003eColors, left to right in the first image: Go for Gold, Victory Violate, Royal Blue, Five Three Blue, Chartreuse, Pink Lemonade, Pearl, Oil Slick.\u003c\/p\u003e\u003cp\u003eActual colors may vary slightly. Victory Violate and Royal Blue are close, though in person there is a slight shade difference in direct light. Pink Lemonade appears pink with light touches of yellow on the edges of the threads. The finish on both Pink Lemonade and Pearl may come out matte. Over time the anodizing may wear off the threads or off the head from wrench contact, so take care while installing to get the longest color life.\u003c\/p\u003e\u003cp\u003eAll colored hardware is made to order. Please allow 1-2 business days for processing.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Go for Gold","offer_id":47318432678076,"sku":"FTTLN716G","price":4.67,"currency_code":"USD","in_stock":true},{"title":"Victory Violate","offer_id":47318432710844,"sku":"FTTLN716V","price":4.67,"currency_code":"USD","in_stock":true},{"title":"Royal Blue","offer_id":47318432743612,"sku":"FTTLN716B","price":4.67,"currency_code":"USD","in_stock":true},{"title":"Five Three Blue","offer_id":47318432776380,"sku":"FTTLN716L","price":4.67,"currency_code":"USD","in_stock":true},{"title":"Chartreuse","offer_id":47318432809148,"sku":"FTTLN716C","price":4.67,"currency_code":"USD","in_stock":true},{"title":"Pink Lemonade","offer_id":47318432841916,"sku":"FTTLN716P","price":4.67,"currency_code":"USD","in_stock":true},{"title":"Pearl","offer_id":47318432874684,"sku":"FTTLN716I","price":4.67,"currency_code":"USD","in_stock":true},{"title":"Oil Slick","offer_id":47318432907452,"sku":"FTTLN716O","price":4.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_967bb1ad-dd7c-4ee6-b142-a72d248ccc23.jpg?v=1787602941"},{"product_id":"color-lab-titanium-5-16-24x1-25-lug-stud-flush-head","title":"Color Lab - Titanium 5\/16-24x1.25 Lug Stud Flush Head","description":"\u003cp\u003eTurn wrenches, turn heads. Color Lab brings race grade titanium hardware in bold, lab tuned anodized hues: ultra light, ultra strong, unmistakably yours. This is the 5\/16-24 x 1.25 titanium wheel stud with a flush head, the same low profile head used on the 1\/4-28 studs, built for quarter midgets, outlaw karts and oval karts.\u003c\/p\u003e\u003cp\u003eThe flush head gives you the pressed-in look at the back of the hub without any of the pressed-in stud problems. Pressed studs spin, back out and wallow their bore once heat and side load find them; a threaded flush head stud sits just as low and stays put, and a broken one comes out with an allen key in the trailer instead of a press on the bench.\u003c\/p\u003e\u003cp\u003eTitanium keeps the weight down where it costs the most. At 7.2 g this stud is nearly 2 g lighter than the previous design and well under a steel stud, and it will not corrode into the hub over a season. The nose is turned to a rounded bullet so the wheel finds the thread on the first try during a hot change.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: titanium\u003c\/li\u003e\n\u003cli\u003eThread: 5\/16-24\u003c\/li\u003e\n\u003cli\u003eLength: 1.25 in\u003c\/li\u003e\n\u003cli\u003eHead: flush, 5\/32 internal allen drive\u003c\/li\u003e\n\u003cli\u003eNose: rounded bullet for quick wheel changes\u003c\/li\u003e\n\u003cli\u003eFinish: anodized, eight Color Lab colors\u003c\/li\u003e\n\u003cli\u003eWeight: 7.2 g, nearly 2 g lighter than the previous design\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold by the piece, so order the quantity you need for the corner or the whole car. Matching 5\/16-24 lug nuts are sold separately.\u003c\/p\u003e\u003cp\u003eColors, left to right in the first image: Go for Gold, Victory Violate, Royal Blue, Five Three Blue, Chartreuse, Pink Lemonade, Pearl, Oil Slick.\u003c\/p\u003e\u003cp\u003eActual colors may vary slightly. Victory Violate and Royal Blue are close, though in person there is a slight shade difference in direct light. Pink Lemonade appears pink with light touches of yellow on the edges of the threads. The finish on both Pink Lemonade and Pearl may come out matte. Over time the anodizing may wear off the threads or off the head from wrench contact, so take care while installing to get the longest color life.\u003c\/p\u003e\u003cp\u003eAll colored hardware is made to order. Please allow 1-2 business days for processing.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Go for Gold","offer_id":47318433104060,"sku":"FTT516LG","price":6.49,"currency_code":"USD","in_stock":true},{"title":"Victory Violate","offer_id":47318433136828,"sku":"FTT516LV","price":6.49,"currency_code":"USD","in_stock":true},{"title":"Royal Blue","offer_id":47318433169596,"sku":"FTT516LB","price":6.49,"currency_code":"USD","in_stock":true},{"title":"Five Three Blue","offer_id":47318433202364,"sku":"FTT516LL","price":6.49,"currency_code":"USD","in_stock":true},{"title":"Chartreuse","offer_id":47318433235132,"sku":"FTT516LC","price":6.49,"currency_code":"USD","in_stock":true},{"title":"Pink Lemonade","offer_id":47318433267900,"sku":"FTT516LP","price":6.49,"currency_code":"USD","in_stock":true},{"title":"Pearl","offer_id":47318433300668,"sku":"FTT516LI","price":6.49,"currency_code":"USD","in_stock":true},{"title":"Oil Slick","offer_id":47318433333436,"sku":"FTT516LO","price":6.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_6369aaed-971f-4fef-8cba-d537b5d19343.jpg?v=1787602987"},{"product_id":"color-lab-titanium-1-4-28-lug-nut-1-2in-head","title":"Color Lab - Titanium 1\/4-28 Lug Nut 1\/2in Head","description":"\u003cp\u003eTurn wrenches, turn heads. Color Lab brings race grade titanium hardware in bold, lab tuned anodized hues: ultra light, ultra strong, unmistakably yours. This is the flanged, non-serrated 1\/4-28 lug nut with the standard 1\/2 in head, sized for our 1\/4-28 lug studs on go karts and quarter midgets.\u003c\/p\u003e\u003cp\u003eMade from lightweight grade 5 titanium, these cut rotating weight right at the outer edge of the wheel while still holding up to the loads racing throws at a lug nut. Titanium is also naturally corrosion resistant, so the nut spins off clean at the end of the year instead of galling onto a rusty stud.\u003c\/p\u003e\u003cp\u003eThe smooth, non-serrated flange face is intentional. Serrations bite the wheel and add friction as the nut comes down, which corrupts the torque reading and pushes load into the stud rather than into clamp. A plain flange lets 8 ft-lbs on the wrench mean 8 ft-lbs at the joint.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: grade 5 titanium\u003c\/li\u003e\n\u003cli\u003eThread: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eHead: 1\/2 in\u003c\/li\u003e\n\u003cli\u003eStyle: flanged, non-serrated\u003c\/li\u003e\n\u003cli\u003eFinish: anodized, eight Color Lab colors\u003c\/li\u003e\n\u003cli\u003eTorque spec: 8 ft-lbs\u003c\/li\u003e\n\u003cli\u003eWeight: 4.7 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold by the piece, so order the count you need for a full set. Matching 1\/4-28 lug studs are sold separately. Torque to 8 ft-lbs with a wrench.\u003c\/p\u003e\u003cp\u003eColors, left to right in the first image: Go for Gold, Victory Violate, Royal Blue, Five Three Blue, Chartreuse, Pink Lemonade, Pearl, Oil Slick.\u003c\/p\u003e\u003cp\u003eActual colors may vary slightly. Victory Violate and Royal Blue are close, though in person there is a slight shade difference in direct light. Pink Lemonade appears pink with light touches of yellow on the edges of the threads. The finish on both Pink Lemonade and Pearl may come out matte. Over time the anodizing may wear off the threads or off the head from wrench contact, so take care while installing to get the longest color life.\u003c\/p\u003e\u003cp\u003eAll colored hardware is made to order. Please allow 1-2 business days for processing.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Go for Gold","offer_id":47318433857724,"sku":"FTTLN12G","price":4.67,"currency_code":"USD","in_stock":true},{"title":"Victory Violate","offer_id":47318433890492,"sku":"FTTLN12V","price":4.67,"currency_code":"USD","in_stock":true},{"title":"Royal Blue","offer_id":47318433923260,"sku":"FTTLN12B","price":4.67,"currency_code":"USD","in_stock":true},{"title":"Five Three Blue","offer_id":47318433956028,"sku":"FTTLN12L","price":4.67,"currency_code":"USD","in_stock":true},{"title":"Chartreuse","offer_id":47318433988796,"sku":"FTTLN12C","price":4.67,"currency_code":"USD","in_stock":true},{"title":"Pink Lemonade","offer_id":47318434021564,"sku":"FTTLN12P","price":4.67,"currency_code":"USD","in_stock":true},{"title":"Pearl","offer_id":47318434054332,"sku":"FTTLN12I","price":4.67,"currency_code":"USD","in_stock":true},{"title":"Oil Slick","offer_id":47318434087100,"sku":"FTTLN12O","price":4.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_b34a1c9b-2cba-40ae-a26a-fb76df81adae.jpg?v=1787603035"},{"product_id":"color-lab-titanium-5-16-24-lug-nut","title":"Color Lab - Titanium 5\/16-24 Lug Nut","description":"\u003cp\u003eTurn wrenches, turn heads. Color Lab brings race grade titanium hardware in bold, lab tuned anodized hues: ultra light, ultra strong, unmistakably yours. This is the flanged, non-serrated 5\/16-24 lug nut, sized for our 5\/16-24 lug studs on junior sprints and outlaw karts.\u003c\/p\u003e\u003cp\u003eMade from lightweight grade 5 titanium, these help cut rotating weight while still holding up to the forces racing throws at a lug nut. The savings land at the outermost part of the wheel, which is the most expensive weight on the car to accelerate, and titanium will not rust the nut onto the stud between race weekends.\u003c\/p\u003e\u003cp\u003eThe smooth, non-serrated flange face keeps friction off the wheel as the nut comes down, so more of the torque you apply becomes real clamp load instead of drag.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: grade 5 titanium\u003c\/li\u003e\n\u003cli\u003eThread: 5\/16-24\u003c\/li\u003e\n\u003cli\u003eStyle: flanged, non-serrated\u003c\/li\u003e\n\u003cli\u003eFinish: anodized, eight Color Lab colors\u003c\/li\u003e\n\u003cli\u003eTorque spec: 8 ft-lbs\u003c\/li\u003e\n\u003cli\u003eWeight: 4.7 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold by the piece, so order the count you need for a full set. Matching 5\/16-24 lug studs are sold separately. Torque to 8 ft-lbs with a wrench.\u003c\/p\u003e\u003cp\u003eColors, left to right in the first image: Go for Gold, Victory Violate, Royal Blue, Five Three Blue, Chartreuse, Pink Lemonade, Pearl, Oil Slick.\u003c\/p\u003e\u003cp\u003eActual colors may vary slightly. Victory Violate and Royal Blue are close, though in person there is a slight shade difference in direct light. Pink Lemonade appears pink with light touches of yellow on the edges of the threads. The finish on both Pink Lemonade and Pearl may come out matte. Over time the anodizing may wear off the threads or off the head from wrench contact, so take care while installing to get the longest color life.\u003c\/p\u003e\u003cp\u003eAll colored hardware is made to order. Please allow 1-2 business days for processing.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Go for Gold","offer_id":47318434447548,"sku":"FTTN516G","price":5.49,"currency_code":"USD","in_stock":true},{"title":"Victory Violate","offer_id":47318434480316,"sku":"FTTN516V","price":5.49,"currency_code":"USD","in_stock":true},{"title":"Royal Blue","offer_id":47318434513084,"sku":"FTTN516B","price":5.49,"currency_code":"USD","in_stock":true},{"title":"Five Three Blue","offer_id":47318434545852,"sku":"FTTN516L","price":5.49,"currency_code":"USD","in_stock":true},{"title":"Chartreuse","offer_id":47318434578620,"sku":"FTTN516C","price":5.49,"currency_code":"USD","in_stock":true},{"title":"Pink Lemonade","offer_id":47318434611388,"sku":"FTTN516P","price":5.49,"currency_code":"USD","in_stock":true},{"title":"Pearl","offer_id":47318434644156,"sku":"FTTN516I","price":5.49,"currency_code":"USD","in_stock":true},{"title":"Oil Slick","offer_id":47318434676924,"sku":"FTTN516O","price":5.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_8d5c8827-82f9-43e7-b38a-d999679ab9a3.jpg?v=1787603082"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/collections\/rn-image_picker_lib_temp_967bb1ad-dd7c-4ee6-b142-a72d248ccc23.jpg?v=1787856501","url":"https:\/\/toigoracing.com\/collections\/five-three-ti-lugs-studs.oembed","provider":"Toigo Racing","version":"1.0","type":"link"}