{"title":"Five Three Ti – Hubs","description":"\u003cp\u003eFive Three Titanium Revolver and Standard hubs, bearings, spacers, dust covers and king pins.\u003c\/p\u003e","products":[{"product_id":"revolver-hubs-1-4-28-dual-pinch-bolt-rear-hub","title":"Revolver Hubs - 1\/4-28 Dual Pinch Bolt Rear Hub","description":"\u003cp\u003eThe Revolver dual pinch bolt rear hub is the extra-security option in the Revolver rear hub line, built for outlaw kart and go kart rear axles. Two pinch bolts instead of one clamp the hub down harder, so it will not walk or spin on the axle when the track goes slick and the kart is loading and unloading the rear end.\u003c\/p\u003e\u003cp\u003eLike the rest of the Revolver line, this hub is designed to cut rotating weight, which is the weight that hurts acceleration the most. Less mass out at the wheel means the engine gets the kart moving sooner off the corner, and the machined Revolver profile stands out on the kart while it does it.\u003c\/p\u003e\u003cp\u003eThe hub is made to hold up to the forces of racing and is machined to pair with our low profile studs, so the head of the stud sits flush and does not stick out past the hub face.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication: outlaw kart and go kart rear axle\u003c\/li\u003e\n\u003cli\u003eTakes three 1\/4-28 studs\u003c\/li\u003e\n\u003cli\u003eTakes two 5\/16-18 pinch bolts\u003c\/li\u003e\n\u003cli\u003eMachined for low profile studs so the head sits flush\u003c\/li\u003e\n\u003cli\u003eWeight, hub only: 140 g\u003c\/li\u003e\n\u003cli\u003eWeight with titanium hardware: 182 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note: these hubs do NOT come with hardware. Studs, nuts and pinch bolts are sold separately, and titanium studs are NOT recommended for use on syrup tracks indoors.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":45379162833084,"sku":"FTRHRHQD","price":37.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_587849fc-2614-4629-b242-df45c42225d6.jpg?v=1787601908"},{"product_id":"revolver-hub-rear-brake-hub","title":"Revolver Hub - 3 Bolt Rear Brake Hub","description":"\u003cp\u003eThe Revolver 3 bolt rear brake hub carries your brake rotor on the rear axle of an outlaw kart or go kart. It is machined from 7075 aluminum, bored at 1.25 in to drop straight onto a standard rear axle, and priced to compete with the plain hubs it replaces.\u003c\/p\u003e\u003cp\u003eAt almost 10 g lighter than other brake hubs, it takes weight off the fastest-spinning part of the kart, and 7075 is stiff enough to keep the rotor running true under hard braking instead of flexing and cooking pads. It looks a lot better than a stock hub while it does it.\u003c\/p\u003e\u003cp\u003eChoose it bare, or paired with our titanium bolt kit, which includes the pinch bolt and three rotor bolts drilled and ready to be safety wired. If titanium is not your thing, the steel option gives you drilled steel rotor bolts with a non-drilled steel pinch bolt.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 7075 aluminum\u003c\/li\u003e\n\u003cli\u003eAxle bore: 1.25 in\u003c\/li\u003e\n\u003cli\u003ePinch bolt: one 1\/4-28\u003c\/li\u003e\n\u003cli\u003eRotor bolts: three 5\/16-24\u003c\/li\u003e\n\u003cli\u003eWeight, bare: 67 g +\/- 2 g\u003c\/li\u003e\n\u003cli\u003eWeight with titanium hardware: 84 g +\/- 2 g\u003c\/li\u003e\n\u003cli\u003eWeight with steel hardware: 97 g +\/- 2 g\u003c\/li\u003e\n\u003cli\u003eTitanium rotor bolts drilled for safety wire\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment note: some other brake hubs use a different pinch bolt size, so check yours before reusing old hardware. Rotor is sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Hub Only","offer_id":45379166044348,"sku":"FTRRHBHB","price":32.24,"currency_code":"USD","in_stock":true},{"title":"Hub With Ti Hardware","offer_id":47335623950524,"sku":"FTRRHBHT","price":57.34,"currency_code":"USD","in_stock":true},{"title":"Hub With Steel Hardware","offer_id":47335623983292,"sku":"FTRRHBHS","price":37.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_1cbac53f-3bce-4482-845b-3264fb51d922.jpg?v=1787601963"},{"product_id":"revolver-hubs-right-front-big-bell-sealed-bearing","title":"Revolver Hubs - 1\/4-28 Right Front Big Bell Sealed Bearing","description":"\u003cp\u003eThe Revolver Big Bell right front hub with sealed bearings is built for outlaw karts and go karts that lean hard on the right front. The larger bell increases the contact patch between the hub and the back of the wheel, which cuts flex between the two when side load builds through the corner.\u003c\/p\u003e\u003cp\u003eIf you have ever pulled a right front wheel and found the imprint of the hub pressed into the back of it, that is exactly the flex this hub solves. Spreading the load across a bigger face keeps the wheel sitting flat instead of working against the studs.\u003c\/p\u003e\u003cp\u003eThis version runs sealed straight ball bearings, which keep track dirt and moisture out of the races and are the simple, low-maintenance choice for most setups. Machined from 7075 aluminum, it cuts rotating weight at the end of the spindle and looks good doing it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 7075 aluminum\u003c\/li\u003e\n\u003cli\u003eStud thread: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eBearings: sealed straight ball, stepped 5\/8 in and 3\/4 in, included\u003c\/li\u003e\n\u003cli\u003eBig Bell design for a larger wheel contact patch and less flex\u003c\/li\u003e\n\u003cli\u003eWeight, bare hub with no studs, bearings, spacers or races: 159 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStuds, nuts and dust covers are sold separately. This hub uses one right front sealed dust cover and one left front \/ right front outer dust cover. Please note: titanium studs are NOT recommended for use on syrup tracks indoors.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":45379170107580,"sku":"FTRHBBSS","price":53.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/20260306-131929.jpg?v=1787602112"},{"product_id":"revolver-hubs-left-front","title":"Revolver Hubs - 1\/4-28 Left Front","description":"\u003cp\u003eThe Revolver 1\/4-28 left front hub is the standard non-stepped front hub for outlaw karts and go karts, machined from 6061 aluminum. It runs two 5\/8 in small bearings, which makes it the right hub for non-stepped spindles, and on smaller karts it can also be run as a right front.\u003c\/p\u003e\u003cp\u003eThis version has been improved again: it is now a full 1\/4 in shorter, so you have more room to move the hubs in and out and dial in your front end width and scrub. A smaller bearing spacer makes it lighter than the hub it replaces, without giving up strength.\u003c\/p\u003e\u003cp\u003eA front hub is rotating weight sitting at the end of the spindle, so trimming mass here shows up in acceleration and in how quickly the front end responds. The machined Revolver profile means you cut that weight and still look good doing it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 6061 aluminum\u003c\/li\u003e\n\u003cli\u003eStud thread: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eBearings: two 5\/8 in small bearings, included\u003c\/li\u003e\n\u003cli\u003eFor non-stepped spindles\u003c\/li\u003e\n\u003cli\u003e1\/4 in shorter than the previous version\u003c\/li\u003e\n\u003cli\u003eWeight, bare hub with no studs, bearings, spacers or races: 76 g\u003c\/li\u003e\n\u003cli\u003eCan be run as a right front on smaller karts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHub comes with two 5\/8 in bearings. Studs, nuts and dust covers are sold separately, and this hub uses two of the left front \/ right front outer dust covers. Pictured with steel (gold color) and titanium (grey color) hardware. Please note: titanium studs are NOT recommended for use on syrup tracks indoors.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":45379181838524,"sku":"FTRHLFSS","price":41.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_25160b87-9d25-467a-8d57-331fba48afe6.jpg?v=1787602047"},{"product_id":"junior-sprint-front-hub","title":"Junior Sprint Front Hub","description":"\u003cp\u003eThe Junior Sprint Front Hub is a fully sealed front wheel hub built for junior sprint karts, developed together with Area 54 LLC. It takes the tried-and-true hub design used in sprint cars and micro sprints and scales it down for the junior sprint world, and should fit most junior sprint chassis.\u003c\/p\u003e\u003cp\u003eTapered inner and outer bearings keep rolling resistance to a minimum while still carrying the heavy side loads a front hub sees mid-corner. A screw-on outer dust cover and a bolted-in inner seal close the hub off from dust, debris, and moisture, which means you can run either grease or oil inside it.\u003c\/p\u003e\u003cp\u003eThe screw-on outer dust cover uses an offset fill screw, so topping the hub off with oil between heats is quick and mess-free. Sealing the hub also keeps track dirt out of the bearings, which is what usually kills front hub bearings on a junior sprint over a long season.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication: junior sprint front hub; fits most junior sprint chassis\u003c\/li\u003e\n\u003cli\u003eTapered inner and outer bearings included\u003c\/li\u003e\n\u003cli\u003eFully sealed: bolted-in inner seal plus screw-on outer dust cover\u003c\/li\u003e\n\u003cli\u003eRuns grease or oil\u003c\/li\u003e\n\u003cli\u003eOffset fill screw in the outer dust cover for easy oil fill\u003c\/li\u003e\n\u003cli\u003eIncludes steel 3\/8-16 hardware\u003c\/li\u003e\n\u003cli\u003eWeight, hub only: 388 g\u003c\/li\u003e\n\u003cli\u003eWeight, fully loaded: 750 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold individually, so order two for a complete front end. Bearings and steel 3\/8-16 hardware are included.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318418260156,"sku":"A54JSFHS","price":149.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_5b775102-2aa7-49e7-bf06-964425034d0e.jpg?v=1787601834"},{"product_id":"outlaw-kart-titanium-left-front-brake-studs","title":"Outlaw Kart Titanium Left Front Brake Studs","description":"\u003cp\u003eTitanium left front brake studs for outlaw karts. They are made to fit the Hegar hub and may fit other left front brake hubs, and they line up perfectly with our titanium brake rotors. Sold as a three pack, which is exactly what one left front brake rotor needs.\u003c\/p\u003e\u003cp\u003eBrake studs live at the outer edge of a spinning rotor, so every gram you take off them is rotating weight the engine no longer has to accelerate out of the corner. These studs come in lighter than the OE steel hardware while still standing up to the clamping torque of hard braking, and titanium shrugs off the rust and corrosion that seizes steel studs into an aluminum hub after a wet weekend.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: titanium\u003c\/li\u003e\n\u003cli\u003eThread: 5\/16-18\u003c\/li\u003e\n\u003cli\u003eDrive: 3\/16 in Allen (socket head)\u003c\/li\u003e\n\u003cli\u003eHead outside diameter: 0.3 in\u003c\/li\u003e\n\u003cli\u003eLength: 1 in\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 4.4 g each, approx. 13 g for the set of three\u003c\/li\u003e\n\u003cli\u003eSold as a three pack\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment: made for the Hegar left front brake hub; may fit others, so check your stud length and thread before ordering. Rotor and nuts sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318418620604,"sku":"FTTOKBB3","price":14.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_aa809db7-e30b-4ddd-852e-ffe1d3d2f3b0.jpg?v=1787601856"},{"product_id":"revolver-hub-1-4-28-rear-hub-kit","title":"Revolver Hub - 1\/4-28 Rear Hub Kit","description":"\u003cp\u003eGreat things come in threes. The Revolver Hub Rear Hub Kit packages a matched set of Revolver rear hubs for your outlaw kart or go kart rear axle, and the Revolver 3-bolt rear brake hub is included at no extra charge when you buy the hubs as a kit rather than one at a time.\u003c\/p\u003e\u003cp\u003eRevolver hubs cut rotating weight where it costs you the most, out at the wheel, so the engine spends less effort spinning the rear end up off the corner. Buying them as a kit also means the studs, nuts and pinch bolts all arrive together and matched, instead of chasing loose hardware the night before a race.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication: outlaw kart and go kart rear axle\u003c\/li\u003e\n\u003cli\u003eStud thread: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eEvery kit includes a rear brake hub with rotor bolts and a 1\/4-28 pinch bolt\u003c\/li\u003e\n\u003cli\u003eSix titanium 1\/4-28 studs and six 1\/4-28 nuts with a 1\/2 in wrench-size head\u003c\/li\u003e\n\u003cli\u003eTitanium 5\/16 pinch bolts included as needed for the hubs in the kit\u003c\/li\u003e\n\u003cli\u003eHubs come with external hex head studs\u003c\/li\u003e\n\u003cli\u003eChoose two single pinch bolt hubs, one single and one dual pinch bolt hub, or two dual pinch bolt hubs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHubs do not come with the hardware installed. Rotor is sold separately. Please note: titanium studs are NOT recommended for use on syrup tracks indoors.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Both Single Pinch Bolt","offer_id":47318418784444,"sku":"FTRHRHKS-1","price":148.3,"currency_code":"USD","in_stock":true},{"title":"One Single and One Dual Pinch Bolt","offer_id":47318418817212,"sku":"FTRHRHKS-2","price":162.75,"currency_code":"USD","in_stock":true},{"title":"Both Dual Pinch Bolt","offer_id":47318418849980,"sku":"FTRHRHKS-3","price":166.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_f6699154-0893-4d1e-9b67-13bd26aa381a.jpg?v=1787601886"},{"product_id":"revolver-hub-full-1-4-28-hub-kit","title":"Revolver Hub - Full 1\/4-28 Hub Kit","description":"\u003cp\u003eThe Revolver Hub Full 1\/4-28 Hub Kit puts every Revolver wheel hub Five Three Titanium builds for a 1\/4-28 stud kart into one package, plus a rear brake hub and all the titanium hardware needed to bolt them on. Built for outlaw karts, junior sprints and go karts running 1\/4-28 wheel studs. This is a generic recommended setup and may not work on all karts.\u003c\/p\u003e\u003cp\u003eMachined aluminum Revolver hubs cut rotating weight where it hurts most, so the kart picks up and slows down quicker. The titanium fasteners shed even more weight and shrug off the corrosion and heat that eat steel hardware over a season.\u003c\/p\u003e\u003cp\u003eBought as a kit, the rear brake hub and dust covers come free - roughly a $356 value.\u003c\/p\u003e\u003cp\u003eIncluded parts:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRevolver Hubs - 1\/4-28 Left Front\u003c\/li\u003e\n\u003cli\u003eRevolver Hubs - 1\/4-28 Right Front Sealed Bearing\u003c\/li\u003e\n\u003cli\u003eRevolver Hubs - 1\/4-28 Single Pinch Bolt Rear Hub\u003c\/li\u003e\n\u003cli\u003eRevolver Hubs - 1\/4-28 Dual Pinch Bolt Rear Hub\u003c\/li\u003e\n\u003cli\u003eRevolver Hub - 3 Bolt Rear Brake Hub\u003c\/li\u003e\n\u003cli\u003eRevolver Hub - Dust Cover\u003c\/li\u003e\n\u003cli\u003eTitanium 5\/16-18x1 Rear Hub Pinch Bolt\u003c\/li\u003e\n\u003cli\u003eTitanium 1\/4-28 Lock Collar\/Brake Hub Bolt\u003c\/li\u003e\n\u003cli\u003eTitanium Go Kart Rotor Bolt 5\/16-24 Drilled\u003c\/li\u003e\n\u003cli\u003eTitanium 1\/4-28 Lug Stud External Hex Head\u003c\/li\u003e\n\u003cli\u003eTitanium 1\/4-28 Lug Nut 1\/2in Head\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery kit ships with titanium 1\/4-28 studs and nuts, 5\/16 and 1\/4 pinch bolts, drilled brake bolts and dust covers. Add a rotor, pads and a mini gear hub and you have a full kart ready to go - rotor, pads and gear hub sold separately. Titanium studs are NOT recommended for use on syrup tracks indoors.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318418948284,"sku":"FTRHKIT1","price":311.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_417de34e-d859-4bba-bbc3-fc19c4d11340.jpg?v=1787601893"},{"product_id":"revolver-hub-mini-gear-hub","title":"Revolver Hub - Mini Gear Hub","description":"\u003cp\u003eThe Revolver Mini Gear Hub completes a full Revolver hub set on an outlaw kart or go kart running a 1.25 inch rear axle. It carries your drive gear on Performance\/PMI and Nitro setups and locks solid to the axle - this hub mounts solid and does not float.\u003c\/p\u003e\u003cp\u003eMachined from 6061 aluminum for strength and anodized black to fight corrosion, it is a one piece design that clamps with a set screw on the keyway, so there are no halves to shift or fret under load. Less rotating weight at the axle means the kart picks up quicker off the corner.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 6061 aluminum, black anodized\u003c\/li\u003e\n\u003cli\u003eFits Performance\/PMI and Nitro gears\u003c\/li\u003e\n\u003cli\u003eOne piece, solid mount - does not float\u003c\/li\u003e\n\u003cli\u003eMade for 1.25 inch axle\u003c\/li\u003e\n\u003cli\u003eFour 1\/4-28 mounting holes plus one 5\/16-24 set screw hole\u003c\/li\u003e\n\u003cli\u003eBolt pattern: 2-9\/16 in diagonally, 1.286 x 2.222 in hole to hole\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 79 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eComes with a stainless set screw; a titanium set screw is coming soon. Our titanium 1\/4-28 hex head studs can be used on this gear hub with either titanium 12 point nuts or aluminum lug nuts - studs and nuts sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318419341500,"sku":"FTARHMGH","price":37.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_0fa58625-3d33-4497-afc6-823c46a2e5f4.jpg?v=1787601917"},{"product_id":"revolver-hubs-1-4-28-single-pinch-bolt-rear-hub","title":"Revolver Hubs - 1\/4-28 Single Pinch Bolt Rear Hub","description":"\u003cp\u003eThe Revolver single pinch bolt rear hub is the lightest hub in the Revolver rear hub line, built for outlaw kart and go kart rear axles. One 5\/16-18 pinch bolt clamps it to the axle, keeping the part count and the weight down for classes and setups that do not need a dual pinch bolt hub.\u003c\/p\u003e\u003cp\u003eRotating weight is the weight that hurts acceleration most, and a rear hub sits right out at the wheel where that penalty is highest. Trimming it here means the engine spins the rear end up quicker off the corner, and the machined Revolver profile stands out on the kart while it does it.\u003c\/p\u003e\u003cp\u003eThe hub is made to hold up to the forces of racing and is machined to pair with our low profile studs, so the head of the stud sits flush and does not stick out past the hub face.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication: outlaw kart and go kart rear axle\u003c\/li\u003e\n\u003cli\u003eTakes 1\/4-28 studs\u003c\/li\u003e\n\u003cli\u003eTakes one 5\/16-18 pinch bolt\u003c\/li\u003e\n\u003cli\u003eMachined for low profile studs so the head sits flush\u003c\/li\u003e\n\u003cli\u003eWeight, hub only: 119 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note: these hubs do NOT come with hardware. We sell discounted three packs of steel and titanium studs and nuts, plus a matching titanium pinch bolt, all sold separately. Titanium studs are NOT recommended for use on syrup tracks indoors.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318419374268,"sku":"FTRHRHSN","price":33.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_e02fff20-18c9-4ff3-9d03-bd878585e8ed.jpg?v=1787601932"},{"product_id":"revolver-hub-4-bolt-rear-hub","title":"Revolver Hub - 4 Bolt Rear Hub","description":"\u003cp\u003eThis aluminum 4 bolt rear hub is made to fit 1.25 inch rear axles on outlaw karts and go karts. Use it to mount a brake rotor or a rear wheel - it uses the standard 4 bolt MCP brake rotor hole pattern, so it drops straight into most existing brake setups.\u003c\/p\u003e\u003cp\u003eIt is lighter than other 4 bolt rear hubs on the market, and every gram pulled off the axle is rotating weight the engine no longer has to spin up. Machined aluminum also resists the corrosion and heat cycling that pit cast parts over a season.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: aluminum\u003c\/li\u003e\n\u003cli\u003eFits 1.25 inch rear axles\u003c\/li\u003e\n\u003cli\u003eBolt pattern: 4x100, standard 4 bolt MCP brake rotor pattern\u003c\/li\u003e\n\u003cli\u003eMounting holes are not threaded and use a 3\/8 inch bolt\u003c\/li\u003e\n\u003cli\u003eRetained with a 5\/16-18 pinch bolt\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 122 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePairs with our 4 bolt titanium rotor. Rotor, rotor bolts and pinch bolt sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318419472572,"sku":"FTRH4BBH","price":46.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_d87a7d0b-a3fb-4972-a7f6-2bc3cbaf9ee6.jpg?v=1787601936"},{"product_id":"revolver-hub-1-4-28-left-front-brake-hub","title":"Revolver Hub - 1\/4-28 Left Front Brake Hub","description":"\u003cp\u003eThe little brother to our 5\/16 left front outlaw kart brake hub. This left front brake hub runs 1\/4-28 wheel studs, so you can put a left front brake on lower power outlaw karts, junior sprints and go karts that are not set up for the larger 5\/16 stud.\u003c\/p\u003e\u003cp\u003eThe sleek Revolver look does not just stand out - the machined pockets cut rotating weight down to help you stay out front. The hub is machined so that our flush head studs sit even with the back side of the hub when installed, giving you a clean press-in look without the press-in problems.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStud size: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eIncludes two 5\/8 inch bearings\u003c\/li\u003e\n\u003cli\u003eIncludes titanium brake floater studs\u003c\/li\u003e\n\u003cli\u003eMachined for flush head studs that sit even with the back of the hub\u003c\/li\u003e\n\u003cli\u003eMade to pair with the Hegar brake rotor and caliper on a keyed spindle\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e1\/4-28 wheel studs and nuts are not included. The titanium Hegar rotor is sold separately; we also offer a larger QRC sized titanium rotor for a QRC caliper, which does not share the same bolt pattern and is not included. Add our titanium left front rotor to cut more weight, and complete the Revolver look by pairing this hub with our right front and rear Revolver Hubs.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318419570876,"sku":"FTRHLFBH-1\/4","price":93.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_1ec40f78-ef91-4c20-99e9-32e693a4f7ec.jpg?v=1787601960"},{"product_id":"revolver-hubs-5-16-24-left-front-non-stepped-right-front","title":"Revolver Hubs - 5\/16-24 Left Front\/Non-Stepped Right Front","description":"\u003cp\u003eThis is our non-brake 5\/16 stud left front hub for outlaw karts and go karts. It runs two 5\/8 inch ID small bearings for non-stepped spindles, and if your kart has a non-stepped right front you can run this same hub on that corner too.\u003c\/p\u003e\u003cp\u003eThe recessed pocket lets the stud sit flush into the backside of the hub, so you get that press-in look without the press-in problems. Machined from 6061 aluminum, it cuts rotating weight off the front end so the kart turns in and picks up quicker - and it looks good doing it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStud size: 5\/16\u003c\/li\u003e\n\u003cli\u003eMaterial: 6061 aluminum\u003c\/li\u003e\n\u003cli\u003eBearings: two 5\/8 inch ID small bearings, included\u003c\/li\u003e\n\u003cli\u003eFor non-stepped spindles - works as a left front or a non-stepped right front\u003c\/li\u003e\n\u003cli\u003eRecessed pockets for flush mount studs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStuds, nuts and dust covers are sold separately. This hub uses two of our left front style dust covers.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318419898556,"sku":"FTRHLFSS-516","price":41.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_f5389e95-c537-4988-94da-b038456685bd.jpg?v=1787601982"},{"product_id":"revolver-hub-front-bearings","title":"Revolver Hub - Front Bearings","description":"\u003cp\u003eReplacement front bearings for Revolver front hubs on outlaw karts and go karts. Three sizes cover the whole Revolver front hub range, so you can rebuild a left front, a right front, or a big bell right front without hunting through a bearing catalog.\u003c\/p\u003e\u003cp\u003eFront bearings take a beating: side load in the corners, heat coming off the brake, and track dirt working past the dust cover all wear them out over a season. A dragging or notchy front bearing is free speed left on the table, and a seized one can end a night, so it is worth keeping fresh spares in the trailer.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTapered bearing and race, for the inside of a right front hub. Inside diameter 0.75 in\u003c\/li\u003e\n\u003cli\u003eSealed small bearing, for a left front hub or the outside of any right front hub. Inside diameter 0.625 in, outside diameter 1.375 in\u003c\/li\u003e\n\u003cli\u003eSealed large bearing, for the inside of sealed right front hubs. Inside diameter 0.75 in, outside diameter 1.625 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold individually, so check how many your hub takes before ordering. The tapered option includes the matching race. Bearing spacers and dust covers are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Small","offer_id":47318419931324,"sku":"FTRFHBSS","price":2.99,"currency_code":"USD","in_stock":true},{"title":"Large","offer_id":47318419964092,"sku":"FTRFHBSL","price":3.89,"currency_code":"USD","in_stock":true},{"title":"Tapered","offer_id":47318419996860,"sku":"FTRFHBTL","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_e10f47db-b846-41a3-8537-bdc1abc5b04e.jpg?v=1787601984"},{"product_id":"standard-hubs-1-4-28-right-front-sealed-bearing","title":"Standard Hubs - 1\/4-28 Right Front Sealed Bearing","description":"\u003cp\u003eFor when you are balling on a budget, or just kicking it old school. This 1\/4-28 right front sealed bearing hub is a cost effective alternative to our Revolver Hubs for outlaw karts, junior sprints and go karts, and it keeps the same recessed stud design.\u003c\/p\u003e\u003cp\u003eThe hub is fully machined, never poured or extruded, so the material is consistent all the way through and the bearing bores stay true. Recessed pockets let flush head studs sit even with the back of the hub. Machined 6061 aluminum keeps rotating weight down and resists corrosion through a full season of heat cycles.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStud size: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eMaterial: 6061 aluminum, fully machined\u003c\/li\u003e\n\u003cli\u003eBearings: sealed straight bearings included, stepped 5\/8 and 3\/4 inch ID\u003c\/li\u003e\n\u003cli\u003eRecessed pockets for flush mount studs\u003c\/li\u003e\n\u003cli\u003eWeight bare (no studs, bearings, spacers or races): 139 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStuds, nuts and dust covers are sold separately. This hub uses one right front and one left front style dust cover. Titanium studs are NOT recommended for use on syrup tracks indoors.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318420193468,"sku":"FTSHFSS","price":32.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/Standard_1_4_inch_go_kart_hub.jpg?v=1787602001"},{"product_id":"revolver-hub-front-bearing-spacer","title":"Revolver Hub - Front Bearing Spacer","description":"\u003cp\u003eAluminum front bearing spacer that sits inside a Revolver front hub, between the two bearings, on outlaw karts and go karts. Every new Revolver front hub ships with the correct spacer already, so this listing is for replacements and spares, and these are the same spacers that come with our front hubs.\u003c\/p\u003e\u003cp\u003eThe spacer is what stops the spindle nut from pulling the two bearings toward each other when you tighten it down. Over-tighten a hub without one and the bearings bind, the wheel drags, and the front end feels tight in a way no amount of chassis adjustment will fix. Aluminum keeps the added weight down at the same time.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: aluminum\u003c\/li\u003e\n\u003cli\u003eFits inside Revolver front hubs, between the bearings\u003c\/li\u003e\n\u003cli\u003eLeft front old style: just under 1 in, ridged\u003c\/li\u003e\n\u003cli\u003eLeft front new short style: just under 3\/4 in, smooth\u003c\/li\u003e\n\u003cli\u003eAlso available for left front stepped hubs and the left front brake hub\u003c\/li\u003e\n\u003cli\u003eRight front versions for tapered bearing and straight sealed bearing hubs\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePick the option that matches your hub, since the left front and right front spacers are not interchangeable. Bearings, dust covers and studs are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"LF - Old Style","offer_id":47318420291772,"sku":"FTARHLFO","price":1.24,"currency_code":"USD","in_stock":true},{"title":"LF - NEW Short Style","offer_id":47318420324540,"sku":"FTARFHLFN","price":1.24,"currency_code":"USD","in_stock":true},{"title":"LF - Stepped","offer_id":47318420357308,"sku":"FTARHLFS","price":1.24,"currency_code":"USD","in_stock":true},{"title":"LF - Brake Hub","offer_id":47318420390076,"sku":"FTARHBHS","price":1.24,"currency_code":"USD","in_stock":true},{"title":"RF Tapered","offer_id":47318420422844,"sku":"FTRHRFST","price":1.24,"currency_code":"USD","in_stock":true},{"title":"RF Sealed","offer_id":47318420455612,"sku":"FTRHRFSS","price":1.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_d7dee817-3073-4b70-bfc0-f589802ee65b.jpg?v=1787602020"},{"product_id":"superfinished-tapered-roller-bearing","title":"Superfinished Tapered Roller Bearing","description":"\u003cp\u003eBetter life, less drag, more speed. This superfinished tapered roller bearing and race set is a direct replacement for the standard tapered bearings and races used in our tapered front hubs on outlaw karts, junior sprints and go karts.\u003c\/p\u003e\u003cp\u003eThese bearings have been micropolished using an isotropic superfinishing process. Machining imperfections are honed down, reducing surface roughness on a microscopic level so your lubricant can actually do its job. When the lubrication works, friction and therefore heat drop - and less heat means less wear and a longer service life.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner diameter: 3\/4 inch\u003c\/li\u003e\n\u003cli\u003eIsotropic superfinished (micropolished) rolling surfaces\u003c\/li\u003e\n\u003cli\u003eBearing and race come as a set\u003c\/li\u003e\n\u003cli\u003eBearings are not pre-lubricated\u003c\/li\u003e\n\u003cli\u003eDirect replacement for our standard tapered front hub bearings and races\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhen using superfinished bearings you must replace the bearing race as well. If you cannot tap the old bearing race out, we suggest carefully running a bead of weld around the center of the race, then tapping the hub on a bench - the race should shrink and move.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318420488380,"sku":"FTRFHBSF","price":20.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_672f3705-1da2-4090-b5a9-0c44bfcf7b19.jpg?v=1787602021"},{"product_id":"titanium-go-kart-king-pin","title":"Titanium Go Kart King Pin","description":"\u003cp\u003eDesigned like no other king pin on the market. This titanium go kart king pin carries the spindle on outlaw karts, junior sprints and go karts, and it is made from grade 5 6AL-4V titanium for the strength to take corner loads and curb hits without bending.\u003c\/p\u003e\u003cp\u003eThe head is cut down for more ground clearance, and the pin is center drilled to lose even more weight. Titanium also shrugs off the rust and galling that seize a steel king pin in the spindle after a wet weekend.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: grade 5 6AL-4V titanium\u003c\/li\u003e\n\u003cli\u003eLengths: 3.75 inch and 4 inch (working length measured from under the head to the end of the threads)\u003c\/li\u003e\n\u003cli\u003eDiameter: just below .5 inch for a smooth but tight fit on most types of karts\u003c\/li\u003e\n\u003cli\u003eCut-down head for added ground clearance\u003c\/li\u003e\n\u003cli\u003eCenter drilled to reduce weight\u003c\/li\u003e\n\u003cli\u003eLength and cotter pin hole placement adjusted for correct castle nut and pin spacing\u003c\/li\u003e\n\u003cli\u003eWeight: 48 grams\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePrice is per piece. Castle nut, cotter pin and spindle hardware sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"3.75 inch","offer_id":47318421209276,"sku":"FTTKP375","price":21.12,"currency_code":"USD","in_stock":true},{"title":"4 Inch","offer_id":47318421242044,"sku":"FTTKP400","price":21.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/IMG_5842.jpg?v=1787602061"},{"product_id":"revolver-hubs-1-4-28-right-front-big-bell-tapered-bearing","title":"Revolver Hubs - 1\/4-28 Right Front Big Bell Tapered Bearing","description":"\u003cp\u003eThe Revolver Big Bell right front hub with tapered bearings is built for outlaw karts and go karts that load the right front hard. The larger bell increases the contact patch between the hub and the back of the wheel, which cuts the flex between the two under heavy side load.\u003c\/p\u003e\u003cp\u003eIf you have ever pulled a right front wheel and found the imprint of the hub pressed into the back of it, that is the flex this hub is designed to solve. Spreading the load over a bigger face keeps the wheel flat on the hub instead of working against three studs.\u003c\/p\u003e\u003cp\u003eThis version runs tapered bearings (angular contact), which are happiest carrying side load rather than pure radial load, exactly what a right front sees in the corner. Customers have also reported that switching to tapered bearings reduced vibration in the front end. Machined from 7075 aluminum, it cuts rotating weight and looks good doing it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 7075 aluminum\u003c\/li\u003e\n\u003cli\u003eStud thread: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eBearings: tapered, angular contact, stepped 5\/8 in and 3\/4 in, included\u003c\/li\u003e\n\u003cli\u003eBig Bell design for a larger wheel contact patch and less flex\u003c\/li\u003e\n\u003cli\u003eWeight, bare hub with no studs, bearings, spacers or races: 162 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAluminum front dust covers, studs and nuts are sold separately. This hub uses one right front tapered dust cover and one left front \/ right front outer dust cover. Please note: titanium studs are NOT recommended for use on syrup tracks indoors.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318421405884,"sku":"FTRHBBTS","price":63.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_c779541f-2bbf-4771-a218-5ea962f22e82.jpg?v=1787602071"},{"product_id":"revolver-hubs-1-4-28-right-front-tapered-bearing","title":"Revolver Hubs - 1\/4-28 Right Front Tapered Bearing","description":"\u003cp\u003eThe Revolver 1\/4-28 right front hub with tapered bearings is the standard-bell right front for outlaw karts and go karts, machined from 7075 aluminum. It runs tapered (angular contact) bearings, which are built to carry side load rather than just radial load, and the right front is where that side load lives.\u003c\/p\u003e\u003cp\u003eTapered bearings hold up better in the corner when the kart is leaning on the right front, and several customers have reported that switching to tapered bearings reduced vibration in the front end compared to straight sealed ball bearings.\u003c\/p\u003e\u003cp\u003eRotating weight at the end of the spindle costs you acceleration and slows down how quickly the front end reacts, so 7075 aluminum keeps this hub strong while staying light. The machined Revolver profile means you cut that weight and still look good doing it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 7075 aluminum\u003c\/li\u003e\n\u003cli\u003eStud thread: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eBearings: tapered, angular contact, stepped 5\/8 in and 3\/4 in, included\u003c\/li\u003e\n\u003cli\u003eWeight, bare hub with no studs, bearings, spacers or races: 120 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStuds, nuts and dust covers are sold separately. This hub uses one right front tapered dust cover and one left front \/ right front outer dust cover. Please note: titanium studs are NOT recommended for use on syrup tracks indoors.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318421602492,"sku":"FTRHRFTS","price":57.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_0ada460f-04e8-4862-b279-6ac2aefccf58.jpg?v=1787602094"},{"product_id":"color-lab-titanium-go-kart-king-pin","title":"Color Lab - Titanium Go Kart King Pin","description":"\u003cp\u003eNow in color. This Color Lab titanium go kart king pin is the same spindle pin that holds the front end together on outlaw karts, junior sprints and go karts, anodized so you can match all your titanium hardware to your kart.\u003c\/p\u003e\u003cp\u003eMade like no other king pin on the market, from grade 5 6AL-4V titanium. The head is cut down and center drilled to lose even more weight, and titanium will not rust or gall into the spindle the way a steel pin does after a wet weekend. The anodized finish is a color layer grown into the titanium itself, so it will not chip or flake off like paint.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: grade 5 6AL-4V titanium, anodized\u003c\/li\u003e\n\u003cli\u003eLengths: 3.75 inch and 4 inch\u003c\/li\u003e\n\u003cli\u003eColors: Go for Gold, Victory Violate, Royal Blue, Five Three Blue, Chartreuse, Pink Lemonade, Pearl and Oil Slick\u003c\/li\u003e\n\u003cli\u003eDiameter: just below .5 inch for a smooth but tight fit on most types of karts\u003c\/li\u003e\n\u003cli\u003eCut-down head, center drilled, drilled for a pin at the bottom\u003c\/li\u003e\n\u003cli\u003eLength and cotter pin hole placement adjusted for correct castle nut and pin spacing\u003c\/li\u003e\n\u003cli\u003eWeight: 48 grams\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePrice is per piece. Castle nut, cotter pin and spindle hardware sold separately. Anodized color can vary slightly from piece to piece and from the photos.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"3.75 inch Go for Gold","offer_id":47318421831868,"sku":"FTTKP375G","price":21.62,"currency_code":"USD","in_stock":true},{"title":"3.75 inch Victory Violate","offer_id":47318421864636,"sku":"FTTKP375V","price":21.62,"currency_code":"USD","in_stock":true},{"title":"3.75 inch Royal Blue","offer_id":47318421897404,"sku":"FTTKP375B","price":21.62,"currency_code":"USD","in_stock":true},{"title":"3.75 inch Five Three Blue","offer_id":47318421930172,"sku":"FTTKP375L","price":21.62,"currency_code":"USD","in_stock":true},{"title":"3.75 inch Chartresue","offer_id":47318421962940,"sku":"FTTKP375C","price":21.62,"currency_code":"USD","in_stock":true},{"title":"3.75 inch Pink Lemonade","offer_id":47318421995708,"sku":"FTTKP375P","price":21.62,"currency_code":"USD","in_stock":true},{"title":"3.75 inch Pearl","offer_id":47318422028476,"sku":"FTTKP375I","price":21.62,"currency_code":"USD","in_stock":true},{"title":"3.75 inch Oil Slick","offer_id":47318422061244,"sku":"FTTKP375O","price":21.62,"currency_code":"USD","in_stock":true},{"title":"4 inch Go for Gold","offer_id":47318422094012,"sku":"FTTKP400G","price":21.62,"currency_code":"USD","in_stock":true},{"title":"4 inch Victory Violate","offer_id":47318422126780,"sku":"FTTKP400V","price":21.62,"currency_code":"USD","in_stock":true},{"title":"4 inch Royal Blue","offer_id":47318422159548,"sku":"FTTKP400B","price":21.62,"currency_code":"USD","in_stock":true},{"title":"4 inch Five Three Blue","offer_id":47318422192316,"sku":"FTTKP400L","price":21.62,"currency_code":"USD","in_stock":true},{"title":"4 inch Chartreuse","offer_id":47318422225084,"sku":"FTTKP400C","price":21.62,"currency_code":"USD","in_stock":true},{"title":"4 inch Pink Lemonade","offer_id":47318422257852,"sku":"FTTKP400P","price":21.62,"currency_code":"USD","in_stock":true},{"title":"4 inch Pearl","offer_id":47318422290620,"sku":"FTTKP400I","price":21.62,"currency_code":"USD","in_stock":true},{"title":"4 inch Oil Slick","offer_id":47318422323388,"sku":"FTTKP400O","price":21.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_ac19b813-2e4b-4ad2-9365-20ad2fb9c2af.jpg?v=1787602108"},{"product_id":"revolver-hub-5-16-24-left-front-brake-hub","title":"Revolver Hub - 5\/16-24 Left Front Brake Hub","description":"\u003cp\u003eBe a real outlaw and go against the norm. This is the 5\/16-24 stud left front brake hub for outlaw karts and go karts running the larger 5\/16 wheel stud, and it lets you put a left front brake on the higher power classes.\u003c\/p\u003e\u003cp\u003eThe sleek Revolver look does not just stand out - the machined pockets cut rotating weight down to help you stay out front. The hub is machined so that our flush head studs sit even with the back side of the hub when installed, so you get the press-in look without the press-in problems.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStud size: 5\/16-24\u003c\/li\u003e\n\u003cli\u003eIncludes two 5\/8 inch bearings\u003c\/li\u003e\n\u003cli\u003eIncludes titanium brake floater studs\u003c\/li\u003e\n\u003cli\u003eMachined for flush head studs that sit even with the back of the hub\u003c\/li\u003e\n\u003cli\u003eMade to pair with the Hegar brake rotor and caliper on a keyed spindle\u003c\/li\u003e\n\u003cli\u003eWeight, hub only: 117 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e5\/16 wheel studs and nuts are not included. The titanium Hegar rotor is sold separately; we also offer a larger QRC sized titanium rotor for a QRC caliper, which does not share the same bolt pattern and is not included. Add our titanium left front rotor to cut more weight, and complete the Revolver look by pairing this hub with our right front and rear Revolver Hubs.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318422651068,"sku":"FTRHLFBH","price":93.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_3b175e6c-cc41-47be-be52-34db70a76ea7.jpg?v=1787602132"},{"product_id":"revolver-hubs-1-4-28-right-front-sealed-bearing","title":"Revolver Hubs - 1\/4-28 Right Front Sealed Bearing","description":"\u003cp\u003eThe Revolver 1\/4-28 right front hub with sealed bearings is the standard-bell right front for outlaw karts and go karts, machined from 7075 aluminum. Sealed straight ball bearings keep dirt, dust and moisture out of the races, which makes this the simple, low-maintenance choice for most front ends.\u003c\/p\u003e\u003cp\u003eThe right front is the corner of the kart that carries the load, so the hub has to be stiff without being heavy. 7075 aluminum gives you the strength to handle it, and every gram trimmed out at the wheel is rotating weight the engine no longer has to spin up off the corner.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 7075 aluminum\u003c\/li\u003e\n\u003cli\u003eStud thread: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eBearings: sealed straight ball, stepped 5\/8 in and 3\/4 in, included\u003c\/li\u003e\n\u003cli\u003eWeight, bare hub with no studs, bearings, spacers or races: 116 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStuds, nuts and dust covers are sold separately. This hub uses one right front sealed dust cover and one left front \/ right front outer dust cover. Please note: titanium studs are NOT recommended for use on syrup tracks indoors.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318422716604,"sku":"FTRHFSS","price":47.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_aa3fa6f5-4066-4677-9ea7-262202f59b91.jpg?v=1787602134"},{"product_id":"titanium-5-16-18x1-rear-hub-pinch-bolt","title":"Titanium 5\/16-18x1 Rear Hub Pinch Bolt","description":"\u003cp\u003eTitanium socket head pinch bolt for outlaw kart and go kart rear hubs. It is the clamp bolt that squeezes the hub onto the rear axle, and it pairs perfectly with our Revolver rear hubs, single or dual pinch bolt.\u003c\/p\u003e\u003cp\u003eGrade 5 titanium keeps the bolt light without giving up the strength a pinch bolt needs, since this is the fastener stopping the hub from spinning on the axle. Titanium also will not rust into an aluminum hub the way a steel bolt does after a wet weekend, so it still comes out with a wrench next season.\u003c\/p\u003e\u003cp\u003eThe head is drilled for safety wire, which is the only real insurance against a pinch bolt backing off mid-race and letting the hub walk on the axle.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: grade 5 titanium\u003c\/li\u003e\n\u003cli\u003eThread: 5\/16-18\u003c\/li\u003e\n\u003cli\u003eLength: 1 in\u003c\/li\u003e\n\u003cli\u003eHead: socket head, drilled for safety wire\u003c\/li\u003e\n\u003cli\u003eWeight: 7.2 g +\/- 0.5 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePrice is per bolt, sold individually. Safety wire is sold separately. A single pinch bolt rear hub takes one, a dual pinch bolt rear hub takes two.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318422814908,"sku":"FT516181","price":5.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/IMG-0548.png?v=1787602149"},{"product_id":"revolver-hubs-5-16-24-right-front-sealed-bearing","title":"Revolver Hubs - 5\/16-24 Right Front Sealed Bearing","description":"\u003cp\u003eThis is the 5\/16-24 right front sealed bearing hub for outlaw karts and go karts running a stepped right front spindle. New and improved design with a recessed pocket so the stud sits flush into the backside of the hub - that press-in look, without the press-in problems.\u003c\/p\u003e\u003cp\u003eMachined from 7075 aluminum, the strongest of the common aluminum alloys, so the stud pockets and bearing bores hold up under the loads the right front sees every corner. Pulling weight off the front wheel is rotating weight the engine never has to spin up, so the kart turns in and picks up quicker. Cut rotating weight and look good doing it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStud size: 5\/16-24\u003c\/li\u003e\n\u003cli\u003eMaterial: 7075 aluminum\u003c\/li\u003e\n\u003cli\u003eBearings: sealed straight bearings included, stepped 5\/8 and 3\/4 inch ID\u003c\/li\u003e\n\u003cli\u003eRecessed pockets for flush mount studs\u003c\/li\u003e\n\u003cli\u003eWeight bare (no studs, bearings, spacers or races): 114 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIf your spindle is not stepped, use our 5\/16 left front hub instead. Studs, nuts and dust covers are sold separately - this hub uses one right front and one left front style dust cover. Titanium studs and nuts are available separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318422847676,"sku":"FTRHRFSS-516","price":47.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_dfd870a8-7801-426d-a99d-ea7a37bf3302.jpg?v=1787602156"},{"product_id":"revolver-hubs-1-4-28-stepped-left-front","title":"Revolver Hubs - 1\/4-28 Stepped Left Front","description":"\u003cp\u003eThis stepped bearing left front hub is built just like our right front, with a 3\/4 inch bearing on the inside and a 5\/8 inch on the outside. It runs 1\/4-28 wheel studs and fits outlaw karts and go karts with stepped left front spindles, including Slack and Rage karts.\u003c\/p\u003e\u003cp\u003eMachined from 6061 aluminum with the Revolver pocketing that pulls rotating weight off the front end, so the kart turns in and picks up quicker. Recessed pockets on the back face let flush head studs sit even with the hub. Cut rotating weight and look good doing it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStud size: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eMaterial: 6061 aluminum\u003c\/li\u003e\n\u003cli\u003eBearings: stepped, 3\/4 inch ID inside and 5\/8 inch ID outside, included\u003c\/li\u003e\n\u003cli\u003eFits Slack and Rage karts\u003c\/li\u003e\n\u003cli\u003eCan be used on smaller karts as a right front\u003c\/li\u003e\n\u003cli\u003eWeight bare, left front stepped (no studs, bearings, spacers or races): 76 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStuds, nuts and dust covers are sold separately. This hub uses one right front and one left front style dust cover.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318423077052,"sku":"FTRHLFSS-S","price":43.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_aa464772-9d9a-40da-afe0-3b163e66c015.jpg?v=1787602178"},{"product_id":"revolver-hub-dust-cover","title":"Revolver Hub - Dust Cover","description":"\u003cp\u003eLightweight aluminum dust covers for Revolver front hubs on outlaw karts and go karts. Three sizes cover the whole front hub range and fit both 1\/4 in and 5\/16 in stud front hubs, so you can seal up a left front, a right front, or a stepped hub from the same listing.\u003c\/p\u003e\u003cp\u003eThe dust cover is what stands between your front bearings and a night of track dirt, dust and moisture. Bearings are cheap, but a bearing that grinds itself apart mid-feature is not, and a covered hub holds its grease instead of flinging it out. Aluminum keeps the cover light so you are not trading bearing life for rotating weight.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: lightweight aluminum\u003c\/li\u003e\n\u003cli\u003eFits both 1\/4 in and 5\/16 in stud front hubs\u003c\/li\u003e\n\u003cli\u003eTapered cover: flat, fits the inside of any hub using a 3\/4 in inside diameter tapered roller bearing\u003c\/li\u003e\n\u003cli\u003eSealed bearing cover: stepped, fits the inner 3\/4 in inside diameter sealed bearing on both right and left fronts\u003c\/li\u003e\n\u003cli\u003eSmallest cover: stepped, fits 5\/8 in inside diameter, for right front outer bearings and both bearings on the standard non-stepped left front hub\u003c\/li\u003e\n\u003cli\u003eWeight, right front inner: approx. 10 g\u003c\/li\u003e\n\u003cli\u003eWeight, left front \/ right front outer: approx. 6.5 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePrice is per cover, sold individually, so check how many your hub takes before ordering. Important: the rubber seals on sealed bearings must be removed for the hub to spin free.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Right Front Tapered Bearing","offer_id":47318423109820,"sku":"FTRHRFTD","price":3.24,"currency_code":"USD","in_stock":true},{"title":"Right Front Sealed\/Left Front Stepped Bearing","offer_id":47318423142588,"sku":"FTRHRFSD","price":3.53,"currency_code":"USD","in_stock":true},{"title":"Left Front\/Right Front Outer","offer_id":47318423175356,"sku":"FTRHLFSD","price":3.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_8f11573b-3548-4a1e-9d12-4fd72a5b1fd6.jpg?v=1787602182"},{"product_id":"titanium-quarter-midget-kingpin","title":"Titanium Quarter Midget Kingpin","description":"\u003cp\u003eTitanium kingpin for quarter midgets, made as a direct replacement for the steel pin currently used on Bullrider and Storm chassis. It may fit other quarter midget chassis as well, so check your pin length and thread before ordering.\u003c\/p\u003e\u003cp\u003eThe kingpin is the pivot the whole front end turns on, so it takes steering loads and bump loads all night long. Grade 5 6AL-4V titanium gives you that strength at roughly half the weight of steel, and it takes the weight off the very front of the car where it matters for turn-in.\u003c\/p\u003e\u003cp\u003eTitanium also does not rust, which is the real problem with a steel kingpin: a corroded pin binds in the spindle, makes the steering feel notchy, and turns a simple front end teardown into a fight.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: grade 5 6AL-4V titanium\u003c\/li\u003e\n\u003cli\u003eThread: 3\/8-24\u003c\/li\u003e\n\u003cli\u003eLength: 3.5 in\u003c\/li\u003e\n\u003cli\u003eHead: socket head Allen\u003c\/li\u003e\n\u003cli\u003eWeight: 28 g\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the current steel pin\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment: fits Bullrider and Storm quarter midget chassis, and may fit others. Sold individually. Nuts, spacers and bearings are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318423240892,"sku":"FTTKPQM1","price":10.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/IMG_5838.jpg?v=1787602199"},{"product_id":"revolver-hub-5-16-24-rear-hub-kit","title":"Revolver Hub - 5\/16-24 Rear Hub Kit","description":"\u003cp\u003eGreat things come in threes. This 5\/16-24 rear hub kit pairs two Revolver rear wheel hubs with a rear brake hub for an outlaw kart or go kart running the larger 5\/16 wheel stud, and it comes with all the titanium hardware needed to bolt the back end together.\u003c\/p\u003e\u003cp\u003eOrder the rear hubs as a kit and the brake hub comes free. The machined Revolver hubs cut rotating weight off the axle so the kart picks up harder off the corner, and the titanium studs, nuts and pinch bolts save more weight while resisting the corrosion and heat that eat steel hardware over a season.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStud size: 5\/16-24\u003c\/li\u003e\n\u003cli\u003eAvailable three ways: two single pinch bolt hubs, one single and one dual pinch bolt hub, or two dual pinch bolt hubs\u003c\/li\u003e\n\u003cli\u003eIncludes a rear brake hub with rotor bolts and a 1\/4-28 pinch bolt\u003c\/li\u003e\n\u003cli\u003eIncludes two three packs of titanium 5\/16-24 studs and nuts\u003c\/li\u003e\n\u003cli\u003eIncludes the titanium 5\/16 pinch bolts needed for the hubs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHubs will not come with hardware installed. Rotor, brake pads and axle are sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Both Single Pinch Bolt","offer_id":47318423339196,"sku":"FTRHRHKS-516","price":175.54,"currency_code":"USD","in_stock":true},{"title":"One Single and One Dual Pinch Bolt","offer_id":47318423371964,"sku":"FTRHRHKS-516B","price":185.29,"currency_code":"USD","in_stock":true},{"title":"Both Dual Pinch Bolt","offer_id":47318423404732,"sku":"FTRHRHKS-516D","price":195.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_b58b0db9-0b36-4bb8-8571-eea36b3d3192.jpg?v=1787602218"},{"product_id":"revolver-hubs-5-16-24-single-pinch-bolt-rear-hub","title":"Revolver Hubs - 5\/16-24 Single Pinch Bolt Rear Hub","description":"\u003cp\u003eThe wait is over. Our 5\/16-24 stud single pinch bolt rear hub is built for outlaw karts and go karts on a 1.25 inch rear axle. The 5\/16 stud is a great move for faster classes, or any time you just want the extra strength of a larger stud.\u003c\/p\u003e\u003cp\u003eThese hubs stand out and help cut rotating weight, which improves acceleration off the corner. They are made to hold up to the force of racing and machined to pair with our low profile studs, so the head of the stud does not stick out past the hub face.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStud size: 5\/16-24, three per hub\u003c\/li\u003e\n\u003cli\u003eSingle pinch bolt design\u003c\/li\u003e\n\u003cli\u003eMachined for 5\/16-18 pinch bolt hardware\u003c\/li\u003e\n\u003cli\u003eFits 1.25 inch axles\u003c\/li\u003e\n\u003cli\u003eMachined for low profile studs so the head sits flush\u003c\/li\u003e\n\u003cli\u003eWeight, hub only: 117 g\u003c\/li\u003e\n\u003cli\u003eWeight with titanium hardware: 156 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese hubs do NOT come with hardware. We sell three packs of titanium studs and nuts at a discounted rate, as well as titanium pinch bolts, all sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318424518844,"sku":"FTARH5RH-S","price":36.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_a5291143-c1a8-4f58-b836-522d1609ae8f.jpg?v=1787602241"},{"product_id":"revolver-hubs-5-16-24-dual-pinch-bolt-rear-hub","title":"Revolver Hubs - 5\/16-24 Dual Pinch Bolt Rear Hub","description":"\u003cp\u003eThe wait is over. Our 5\/16-24 stud dual pinch bolt rear hub is built for outlaw karts and go karts on a 1.25 inch rear axle, with that little extra security to make sure the hub does not move around on you. The 5\/16 stud is a great move for faster classes, or any time you just want the extra strength of a larger stud.\u003c\/p\u003e\u003cp\u003eThese hubs stand out and help cut rotating weight, which improves acceleration off the corner. They are made to hold up to the force of racing and machined to pair with our low profile studs, so the head of the stud does not stick out past the hub face.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStud size: 5\/16-24, three per hub\u003c\/li\u003e\n\u003cli\u003eDual pinch bolt design for extra clamping security\u003c\/li\u003e\n\u003cli\u003eMachined for two 5\/16-18 pinch bolts\u003c\/li\u003e\n\u003cli\u003eFits 1.25 inch axles\u003c\/li\u003e\n\u003cli\u003eMachined for low profile studs so the head sits flush\u003c\/li\u003e\n\u003cli\u003eWeight, hub only: 138 g\u003c\/li\u003e\n\u003cli\u003eWeight with titanium hardware: 185 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese hubs do NOT come with hardware. We sell three packs of titanium studs and nuts at a discounted rate, as well as titanium pinch bolts, all sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318424584380,"sku":"FTARH5RH-D","price":40.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_33416ab2-dfe5-4fd5-90bf-0f71d25d5adc.jpg?v=1787602263"},{"product_id":"steel-5-16-18x1-rear-hub-pinch-bolt","title":"Steel 5\/16-18x1 Rear Hub Pinch Bolt","description":"\u003cp\u003eIf titanium is not your thing, or your division does not allow it, grab these instead. This is the steel 5\/16-18 x 1 inch pinch bolt that clamps a rear hub to the axle on an outlaw kart, junior sprint or go kart.\u003c\/p\u003e\u003cp\u003eJust your standard steel socket head allen bolt with a colorful zinc coating, so it holds thread torque and shrugs off surface rust between race weekends. Steel keeps you legal in classes that write titanium fasteners out of the rulebook.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: steel with zinc coating\u003c\/li\u003e\n\u003cli\u003eThread: 5\/16-18\u003c\/li\u003e\n\u003cli\u003eLength: 1 inch\u003c\/li\u003e\n\u003cli\u003eHead: socket head, allen drive\u003c\/li\u003e\n\u003cli\u003eApplication: rear hub pinch bolt\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold individually. Pair these with our steel 1\/4-28 hub studs and nuts and our 1\/4-28 lock collar bolt, all sold separately.\u003c\/p\u003e","brand":"Five Three Titanium","offers":[{"title":"Default Title","offer_id":47318424617148,"sku":"FTS516181","price":0.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/files\/rn-image_picker_lib_temp_2ac18c23-0ad4-44b3-95a8-c4d2ed2831f8.jpg?v=1787602280"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1247\/1741\/collections\/rn-image_picker_lib_temp_b58b0db9-0b36-4bb8-8571-eea36b3d3192.jpg?v=1787856499","url":"https:\/\/toigoracing.com\/collections\/five-three-ti-hubs.oembed","provider":"Toigo Racing","version":"1.0","type":"link"}